# lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03) 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 25) 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller 00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) 00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) 00:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) 00:0b.0 Network controller: Broadcom Inc. and subsidiaries BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter # # lsmod Module Size Used by iptable_filter 1096 0 ip_tables 10066 1 iptable_filter nls_iso8859_2 3621 2 fan 3582 0 b43 379935 0 bcma 35915 1 b43 mac80211 378079 1 b43 cfg80211 223383 2 b43,mac80211 rfkill 12594 1 cfg80211 joydev 7951 0 snd_intel8x0 23611 0 ssb 49082 1 b43 snd_ac97_codec 86524 1 snd_intel8x0 snd_pcsp 6402 0 snd_seq_dummy 943 0 snd_seq_oss 24725 0 snd_pcm_oss 36095 0 snd_seq_midi 4222 0 snd_seq_midi_event 4612 2 snd_seq_oss,snd_seq_midi snd_mixer_oss 12701 1 snd_pcm_oss snd_rawmidi 16328 1 snd_seq_midi snd_pcm 71375 4 snd_pcm_oss,snd_ac97_codec,snd_intel8x0,snd_pcsp snd_seq 42001 6 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy,snd_seq_midi k8temp 2754 0 snd_seq_device 2612 4 snd_seq,snd_rawmidi,snd_seq_oss,snd_seq_midi hwmon 2386 1 k8temp sis900 18240 0 snd_timer 16201 2 snd_pcm,snd_seq yenta_socket 19715 0 mii 3923 1 sis900 snd 44882 11 snd_pcm_oss,snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_seq_device,snd_mixer_oss,snd_pcsp input_leds 2286 0 soundcore 4259 1 snd ac97_bus 1134 1 snd_ac97_codec i2c_sis96x 2956 0 shpchp 22617 0 fjes 19550 0 battery 11357 0 tpm_tis 8679 0 ac 4037 0 tpm 29179 1 tpm_tis zram 17857 1 # [ 0.471823] vgaarb: bridge control possible 0000:01:00.0 [ 0.473609] SCSI subsystem initialized [ 0.474275] libata version 3.00 loaded. [ 0.474479] ACPI: bus type USB registered [ 0.474589] usbcore: registered new interface driver usbfs [ 0.474632] usbcore: registered new interface driver hub [ 0.474669] usbcore: registered new device driver usb [ 0.475760] PCI: Using ACPI for IRQ routing [ 0.475769] PCI: pci_cache_line_size set to 64 bytes [ 0.475819] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.475822] e820: reserve RAM buffer [mem 0x1bef0000-0x1bffffff] [ 0.476454] clocksource: Switched to clocksource refined-jiffies [ 0.476603] FS-Cache: Loaded [ 0.476788] pnp: PnP ACPI init [ 0.476966] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.477348] system 00:01: [io 0x8000-0x807f] has been reserved [ 0.477355] system 00:01: [io 0x8080-0x80ff] has been reserved [ 0.477358] system 00:01: [io 0x8100-0x811f] has been reserved [ 0.477362] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.477366] system 00:01: [io 0x03f0-0x03f1] has been reserved [ 0.477372] system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.477375] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.477378] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.477381] system 00:01: [mem 0xffc00000-0xffc00fff] has been reserved [ 0.477384] system 00:01: [mem 0xffe00000-0xffe00fff] has been reserved [ 0.477387] system 00:01: [mem 0xffe80000-0xffefffff] has been reserved [ 0.477390] system 00:01: [mem 0xfffe0000-0xfffeffff] has been reserved [ 0.477394] system 00:01: [mem 0xffff0000-0xffffffff] has been reserved [ 0.477401] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.477511] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.477573] pnp 00:03: Plug and Play ACPI device, IDs SYN1003 SYN1002 SYN1000 PNP0f13 (active) [ 0.477748] pnp: PnP ACPI: found 4 devices [ 0.518085] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.518261] clocksource: Switched to clocksource acpi_pm [ 0.518304] pci 0000:00:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.518307] pci 0000:00:06.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.518311] pci 0000:00:06.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.518315] pci 0000:00:06.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.518318] pci 0000:00:06.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100 [ 0.518322] pci 0000:00:06.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100 [ 0.518325] pci 0000:00:06.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100 [ 0.518328] pci 0000:00:06.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100 [ 0.518340] pci 0000:00:06.0: BAR 0: assigned [mem 0x20000000-0x20000fff] [ 0.518348] pci 0000:00:06.0: BAR 15: assigned [mem 0x24000000-0x27ffffff pref] [ 0.518353] pci 0000:00:06.0: BAR 16: assigned [mem 0x28000000-0x2bffffff] [ 0.518358] pci 0000:00:04.0: BAR 6: assigned [mem 0x20020000-0x2003ffff pref] [ 0.518365] pci 0000:00:06.0: BAR 13: assigned [io 0x2400-0x24ff] [ 0.518370] pci 0000:00:06.0: BAR 14: assigned [io 0x2800-0x28ff] [ 0.518375] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.518379] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.518384] pci 0000:00:01.0: bridge window [mem 0xe2100000-0xe21fffff] [ 0.518388] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xefffffff pref] [ 0.518394] pci 0000:00:06.0: CardBus bridge to [bus 02-05] [ 0.518397] pci 0000:00:06.0: bridge window [io 0x2400-0x24ff] [ 0.518401] pci 0000:00:06.0: bridge window [io 0x2800-0x28ff] [ 0.518405] pci 0000:00:06.0: bridge window [mem 0x24000000-0x27ffffff pref] [ 0.518409] pci 0000:00:06.0: bridge window [mem 0x28000000-0x2bffffff] [ 0.518416] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window] [ 0.518419] pci_bus 0000:00: resource 5 [mem 0x000d6000-0x000d7fff window] [ 0.518422] pci_bus 0000:00: resource 6 [mem 0x000d8000-0x000d9fff window] [ 0.518425] pci_bus 0000:00: resource 7 [mem 0x000da000-0x000dbfff window] [ 0.518427] pci_bus 0000:00: resource 8 [mem 0x20000000-0xffffffff window] [ 0.518430] pci_bus 0000:00: resource 9 [io 0x0000-0x0cf7 window] [ 0.518433] pci_bus 0000:00: resource 10 [io 0x0d00-0xffff window] [ 0.518436] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.518439] pci_bus 0000:01: resource 1 [mem 0xe2100000-0xe21fffff] [ 0.518441] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref] [ 0.518444] pci_bus 0000:02: resource 0 [io 0x2400-0x24ff] [ 0.518447] pci_bus 0000:02: resource 1 [io 0x2800-0x28ff] [ 0.518449] pci_bus 0000:02: resource 2 [mem 0x24000000-0x27ffffff pref] [ 0.518452] pci_bus 0000:02: resource 3 [mem 0x28000000-0x2bffffff] [ 0.518505] NET: Registered protocol family 2 [ 0.518800] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.518821] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.518851] TCP: Hash tables configured (established 4096 bind 4096) [ 0.518893] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.518901] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.518985] NET: Registered protocol family 1 [ 0.519176] RPC: Registered named UNIX socket transport module. [ 0.519180] RPC: Registered udp transport module. [ 0.519181] RPC: Registered tcp transport module. [ 0.519182] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.036190] pci 0000:01:00.0: Video device with shadowed ROM [ 1.036197] PCI: CLS 0 bytes, default 64 [ 1.036294] Trying to unpack rootfs image as initramfs... [ 1.077500] Freeing initrd memory: 1356K [ 1.078813] Initialise system trusted keyring [ 1.085469] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.086408] NFS: Registering the id_resolver key type [ 1.086430] Key type id_resolver registered [ 1.086431] Key type id_legacy registered [ 1.086438] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.087163] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.087297] fuse init (API version 7.23) [ 1.088001] aufs 4.4-20170911 [ 1.318703] async_tx: api initialized (async) [ 1.318714] Key type asymmetric registered [ 1.318717] Asymmetric key parser 'x509' registered [ 1.318826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.318830] io scheduler noop registered [ 1.318846] io scheduler cfq registered (default) [ 1.319167] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.319297] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.320166] ACPI: Lid Switch [LID] [ 1.320282] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.320287] ACPI: Power Button [PWRB] [ 1.320339] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.320341] ACPI: Sleep Button [SLPB] [ 1.320391] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.320393] ACPI: Power Button [PWRF] [ 1.320474] tsc: Marking TSC unstable due to TSC halts in idle [ 1.320483] ACPI: acpi_idle registered with cpuidle [ 1.335318] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.335324] ACPI: Thermal Zone [THRM] (31 C) [ 1.335393] GHES: HEST is not enabled! [ 1.373878] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.375478] Linux agpgart interface v0.103 [ 1.375514] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760] [ 1.377189] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000 [ 1.384109] brd: module loaded [ 1.392599] loop: module loaded [ 1.392612] HP CISS Driver (v 3.6.26) [ 1.394332] nbd: registered device at major 43 [ 1.397458] mtip32xx Version 1.3.1 [ 1.397667] usbcore: registered new interface driver rtsx_usb [ 1.402272] pata_sis 0000:00:02.5: version 0.5.2 [ 1.402434] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller [ 1.404235] scsi host0: pata_sis [ 1.404535] scsi host1: pata_sis [ 1.404602] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14 [ 1.404605] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15 [ 1.405114] libphy: Fixed MDIO Bus: probed [ 1.405121] Fusion MPT base driver 3.04.20 [ 1.405121] Copyright (c) 1999-2008 LSI Corporation [ 1.405133] Fusion MPT SPI Host driver 3.04.20 [ 1.405172] Fusion MPT FC Host driver 3.04.20 [ 1.405205] Fusion MPT SAS Host driver 3.04.20 [ 1.405235] Fusion MPT misc device (ioctl) driver 3.04.20 [ 1.405664] mptctl: Registered with Fusion MPT base driver [ 1.405669] mptctl: /dev/mptctl @ (major,minor=10,220) [ 1.405680] Fusion MPT LAN driver 3.04.20 [ 1.405806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.405810] ehci-pci: EHCI PCI platform driver [ 1.405987] ehci-pci 0000:00:03.2: EHCI Host Controller [ 1.406056] ehci-pci 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 1.406127] ehci-pci 0000:00:03.2: cache line size of 64 is not supported [ 1.406151] ehci-pci 0000:00:03.2: irq 23, io mem 0xe2004000 [ 1.412028] ehci-pci 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 1.412117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.412120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.412123] usb usb1: Product: EHCI Host Controller [ 1.412126] usb usb1: Manufacturer: Linux 4.4.249 ehci_hcd [ 1.412128] usb usb1: SerialNumber: 0000:00:03.2 [ 1.412337] hub 1-0:1.0: USB hub found [ 1.412350] hub 1-0:1.0: 6 ports detected [ 1.412579] ehci-platform: EHCI generic platform driver [ 1.412657] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.412672] ohci-pci: OHCI PCI platform driver [ 1.412844] ohci-pci 0000:00:03.0: OHCI PCI host controller [ 1.412856] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 1.412899] ohci-pci 0000:00:03.0: irq 20, io mem 0xe2002000 [ 1.463106] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.463112] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.463115] usb usb2: Product: OHCI PCI host controller [ 1.463118] usb usb2: Manufacturer: Linux 4.4.249 ohci_hcd [ 1.463120] usb usb2: SerialNumber: 0000:00:03.0 [ 1.463337] hub 2-0:1.0: USB hub found [ 1.463351] hub 2-0:1.0: 3 ports detected [ 1.463633] ohci-pci 0000:00:03.1: OHCI PCI host controller [ 1.463647] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 1.463699] ohci-pci 0000:00:03.1: irq 21, io mem 0xe2003000 [ 1.514091] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.514097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.514099] usb usb3: Product: OHCI PCI host controller [ 1.514102] usb usb3: Manufacturer: Linux 4.4.249 ohci_hcd [ 1.514104] usb usb3: SerialNumber: 0000:00:03.1 [ 1.514316] hub 3-0:1.0: USB hub found [ 1.514331] hub 3-0:1.0: 3 ports detected [ 1.514510] ohci-platform: OHCI generic platform driver [ 1.514540] uhci_hcd: USB Universal Host Controller Interface driver [ 1.514651] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 1.514652] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 1.515247] usbcore: registered new interface driver uas [ 1.515295] usbcore: registered new interface driver usb-storage [ 1.515311] usbcore: registered new interface driver ums-alauda [ 1.515327] usbcore: registered new interface driver ums-cypress [ 1.515342] usbcore: registered new interface driver ums-datafab [ 1.515367] usbcore: registered new interface driver ums_eneub6250 [ 1.515383] usbcore: registered new interface driver ums-freecom [ 1.515399] usbcore: registered new interface driver ums-isd200 [ 1.515415] usbcore: registered new interface driver ums-jumpshot [ 1.515434] usbcore: registered new interface driver ums-karma [ 1.515449] usbcore: registered new interface driver ums-onetouch [ 1.515468] usbcore: registered new interface driver ums-realtek [ 1.515484] usbcore: registered new interface driver ums-sddr09 [ 1.515499] usbcore: registered new interface driver ums-sddr55 [ 1.515514] usbcore: registered new interface driver ums-usbat [ 1.516069] usbcore: registered new interface driver appledisplay [ 1.516140] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.520890] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.520907] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.521484] mousedev: PS/2 mouse device common for all mice [ 1.523746] usbcore: registered new interface driver synaptics_usb [ 1.523926] rtc_cmos 00:00: RTC can wake from S4 [ 1.524179] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.524214] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram [ 1.524259] i2c /dev entries driver [ 1.524535] md: linear personality registered for level -1 [ 1.524541] md: raid0 personality registered for level 0 [ 1.524544] md: raid1 personality registered for level 1 [ 1.524547] md: raid10 personality registered for level 10 [ 1.524828] md: raid6 personality registered for level 6 [ 1.524831] md: raid5 personality registered for level 5 [ 1.524833] md: raid4 personality registered for level 4 [ 1.525096] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.525196] sdhci: Secure Digital Host Controller Interface driver [ 1.525198] sdhci: Copyright(c) Pierre Ossman [ 1.525387] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 1.525389] wbsd: Copyright(c) Pierre Ossman [ 1.525664] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 1.526400] usbcore: registered new interface driver vub300 [ 1.526429] usbcore: registered new interface driver ushc [ 1.526532] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.527116] hidraw: raw HID events driver (C) Jiri Kosina [ 1.529350] usbcore: registered new interface driver usbhid [ 1.529355] usbhid: USB HID core driver [ 1.531527] ipip: IPv4 over IPv4 tunneling driver [ 1.531749] NET: Registered protocol family 17 [ 1.531793] Key type dns_resolver registered [ 1.532292] Using IPI No-Shortcut mode [ 1.532487] registered taskstats version 1 [ 1.532492] Loading compiled-in X.509 certificates [ 1.537755] Loaded X.509 cert 'Build time autogenerated kernel key: 68ad7ce2785a50fc266d40894ba60c025b691cd9' [ 1.538211] zswap: default zpool zbud not available [ 1.538215] zswap: pool creation failed [ 1.539373] Btrfs loaded [ 1.539776] Key type encrypted registered [ 1.540228] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 1.540346] rtc_cmos 00:00: setting system clock to 2023-04-26 15:59:32 UTC (1682524772) [ 1.540570] powernow_k8: fid 0xa (1800 MHz), vid 0xa [ 1.540573] powernow_k8: fid 0x8 (1600 MHz), vid 0xc [ 1.540574] powernow_k8: fid 0x0 (800 MHz), vid 0x13 [ 1.540619] powernow_k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ (1 cpu cores) (version 2.20.00) [ 1.541300] device-tree: Duplicate name in testcase-data, renamed to "duplicate-name#1" [ 1.541890] ### dt-test ### start of unittest - you will see error messages [ 1.541992] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 1.541994] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 1.541997] /testcase-data/phandle-tests/consumer-a: could not find phandle [ 1.542021] /testcase-data/phandle-tests/consumer-a: could not find phandle [ 1.542023] /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 1.542025] /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 1.542277] irq: no irq domain found for /testcase-data/interrupts/intc0 ! [ 1.545109] overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8 [ 1.545115] overlay_removal_is_ok: overlay #5 is not topmost [ 1.545116] of_overlay_destroy: removal check failed for overlay #5 [ 1.548875] ### dt-test ### end of unittest - 148 passed, 0 failed [ 1.557135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.559451] ata1.00: ATA-7: HTS421260H9AT00, HA2OA70G, max UDMA/100 [ 1.559457] ata1.00: 117210240 sectors, multi 16: LBA48 [ 1.565420] ata1.00: configured for UDMA/100 [ 1.565821] scsi 0:0:0:0: Direct-Access ATA HTS421260H9AT00 A70G PQ: 0 ANSI: 5 [ 1.566311] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.9 GiB) [ 1.566373] sd 0:0:0:0: [sda] Write Protect is off [ 1.566377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.566402] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.590607] sda: sda1 [ 1.591102] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.720233] ata2.00: ATAPI: Slimtype DVDRW SOSW-833S, VRS2, max UDMA/33 [ 1.726219] ata2.00: configured for UDMA/33 [ 1.727854] scsi 1:0:0:0: CD-ROM Slimtype DVDRW SOSW-833S VRS2 PQ: 0 ANSI: 5 [ 1.749381] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.749388] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.749622] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.750640] Freeing unused kernel memory: 556K [ 1.750732] Write protecting the kernel text: 9572k [ 1.750760] Write protecting the kernel read-only data: 2776k [ 1.750768] NX-protecting the kernel data: 4764k [ 1.976031] usb 3-2: new full-speed USB device number 2 using ohci-pci [ 2.080030] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2bbf1768, max_idle_ns: 440795204998 ns [ 2.175019] usb 3-2: New USB device found, idVendor=046d, idProduct=c52f [ 2.175023] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.175026] usb 3-2: Product: USB Receiver [ 2.175028] usb 3-2: Manufacturer: Logitech [ 2.180289] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0/0x0, board id: 0, fw id: 41763 [ 2.188418] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/0003:046D:C52F.0001/input/input7 [ 2.188835] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:03.1-2/input0 [ 2.199203] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.1/0003:046D:C52F.0002/input/input8 [ 2.215446] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.250457] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:03.1-2/input1 [ 2.618882] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.098451] random: nonblocking pool is initialized [ 4.818050] usb 1-6: new high-speed USB device number 3 using ehci-pci [ 4.935781] usb 1-6: New USB device found, idVendor=125f, idProduct=a35a [ 4.935788] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 4.935791] usb 1-6: Product: HD650 [ 4.935794] usb 1-6: Manufacturer: ADATA [ 4.935796] usb 1-6: SerialNumber: 40A178432094 [ 4.937776] scsi host2: uas [ 4.947333] scsi 2:0:0:0: Direct-Access ADATA HD650 0 PQ: 0 ANSI: 6 [ 4.949409] sd 2:0:0:0: [sdb] Spinning up disk... [ 5.604630] zram: Added device: zram0 [ 5.802231] zram0: detected capacity change from 0 to 438091776 [ 5.945996] Adding 427820k swap on /dev/zram0. Priority:-1 extents:1 across:427820k SSFS [ 5.950066] ..ready [ 6.953193] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 6.953200] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 6.962075] sd 2:0:0:0: [sdb] Write Protect is off [ 6.962084] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 6.962743] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.023351] sdb: sdb1 sdb2 [ 7.041146] sd 2:0:0:0: [sdb] Attached SCSI disk [ 8.588172] udevd[2764]: specified group 'input' unknown [ 8.588863] udevd[2764]: NAME="%k" is ignored, because it breaks kernel supplied names, please remove it from /etc/udev/rules.d/55-cups.rules:5 [ 8.659644] udevd[2764]: unknown key 'DEVTYPE' in /etc/udev/rules.d/88-puppy-autodetect.rules:6 [ 8.659654] udevd[2764]: invalid rule '/etc/udev/rules.d/88-puppy-autodetect.rules:6' [ 8.659661] udevd[2764]: unknown key 'DEVTYPE' in /etc/udev/rules.d/88-puppy-autodetect.rules:10 [ 8.659664] udevd[2764]: invalid rule '/etc/udev/rules.d/88-puppy-autodetect.rules:10' [ 8.663138] udevd[2765]: starting eudev-3.1.5 [ 9.048831] atkbd serio0: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0). [ 9.048839] atkbd serio0: Use 'setkeycodes e055 ' to make it known. [ 9.058892] atkbd serio0: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0). [ 9.058901] atkbd serio0: Use 'setkeycodes e055 ' to make it known. [ 9.312209] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 9.312604] ACPI: AC Adapter [ACAD] (on-line) [ 9.795149] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 9.795164] ACPI: Battery Slot [BAT1] (battery present) [ 10.402089] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 10.489194] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100 [ 10.498505] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.594685] atkbd serio0: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0). [ 10.594693] atkbd serio0: Use 'setkeycodes e056 ' to make it known. [ 10.605056] atkbd serio0: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0). [ 10.605063] atkbd serio0: Use 'setkeycodes e056 ' to make it known. [ 11.101059] atkbd serio0: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0). [ 11.101067] atkbd serio0: Use 'setkeycodes e055 ' to make it known. [ 11.111117] atkbd serio0: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0). [ 11.111123] atkbd serio0: Use 'setkeycodes e055 ' to make it known. [ 11.165521] yenta_cardbus 0000:00:06.0: enabling device (0000 -> 0003) [ 11.165655] yenta_cardbus 0000:00:06.0: CardBus bridge found [1025:0083] [ 11.165669] yenta_cardbus 0000:00:06.0: Using CSCINT to route CSC interrupts to PCI [ 11.165672] yenta_cardbus 0000:00:06.0: Routing CardBus interrupts to PCI [ 11.165676] yenta_cardbus 0000:00:06.0: TI: mfunc 0x00521d22, devctl 0x64 [ 11.347573] sis900.c: v1.08.10 Apr. 2 2006 [ 11.389061] yenta_cardbus 0000:00:06.0: ISA IRQ mask 0x06f8, PCI irq 19 [ 11.389068] yenta_cardbus 0000:00:06.0: Socket status: 30000006 [ 11.441470] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. [ 11.447370] 0000:00:04.0: Using transceiver found at address 13 as default [ 11.636841] eth0: SiS 900 PCI Fast Ethernet at 0x00011800, IRQ 19, 00:16:36:02:98:2c [ 12.014382] atkbd serio0: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0). [ 12.014390] atkbd serio0: Use 'setkeycodes e056 ' to make it known. [ 12.024436] atkbd serio0: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0). [ 12.024443] atkbd serio0: Use 'setkeycodes e056 ' to make it known. [ 12.677086] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 12.699747] udevd[2786]: '/bin/sh -c 'echo add_pcspkr_platform___platform:pcspkr >> /tmp/udevtrace.log'' [5615] terminated by signal 1 (Hangup) [ 12.728770] udevd[2786]: '/bin/sh -c 'echo add_sis900_module___ >> /tmp/udevtrace.log'' [5618] terminated by signal 1 (Hangup) [ 12.738740] udevd[2786]: '/bin/sh -c 'echo add_snd_seq_device_module___ >> /tmp/udevtrace.log'' [5622] terminated by signal 1 (Hangup) [ 12.779385] udevd[2786]: '/bin/sh -c 'echo add_k8temp_module___ >> /tmp/udevtrace.log'' [5625] terminated by signal 1 (Hangup) [ 12.884100] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00 [ 12.884110] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) [ 12.884115] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) [ 12.884119] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) [ 12.884124] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) [ 12.910085] gpiochip_find_base: found new base at 496 [ 12.910774] gpiochip_add: registered GPIOs 496 to 511 on device: ssb_chipco_gpio [ 12.910852] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0b.0 [ 12.990475] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 12.990488] excluding 0xc0000-0xd7fff 0xdc000-0xfffff [ 12.990539] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 12.990552] clean [ 12.990591] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 12.990602] clean [ 13.775172] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 50489 usecs (2429 samples) [ 13.775178] snd_intel8x0 0000:00:02.7: clocking to 48000 [ 13.777962] udevd[2773]: '/bin/sh -c 'echo add_0000:00:02.7_pci_0x1039_0x7012_pci:v00001039d00007012sv00001025sd00000083bc04sc01i00 >> /tmp/udevtrace.log'' [5820] terminated by signal 1 (Hangup) [ 13.799905] udevd[2773]: '/bin/sh -c 'echo change_ttyS3_tty___ >> /tmp/udevtrace.log'' [5822] terminated by signal 1 (Hangup) [ 13.840996] udevd[2773]: '/bin/sh -c 'echo change_event4_input___platform:i8042 >> /tmp/udevtrace.log'' [5832] terminated by signal 1 (Hangup) [ 18.288185] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 18.303073] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7 [ 18.303096] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 8, Version 0 [ 18.311278] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2 [ 18.311285] b43 ssb0:0: Falling back to user helper [ 18.311669] Broadcom 43xx driver loaded [ Features: PNLS ] [ 18.411001] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2 [ 18.411055] b43 ssb0:0: Falling back to user helper [ 18.434047] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2 [ 18.434053] b43 ssb0:0: Falling back to user helper [ 18.451772] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2 [ 18.451778] b43 ssb0:0: Falling back to user helper [ 18.487567] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" request failed (err=-11) [ 18.487572] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" request failed (err=-11) [ 18.487574] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 18.549266] cfg80211: World regulatory domain updated: [ 18.549272] cfg80211: DFS Master region: unset [ 18.549275] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 18.549280] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 18.549284] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 18.549286] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 18.549289] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 18.549292] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 18.549294] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 18.549296] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 18.549298] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 24.649469] eth0: Media Link Off [ 24.740313] eth0: Media Link Off [ 24.820430] eth0: Media Link Off [ 46.018181] ip_tables: (C) 2000-2006 Netfilter Core Team [ 343.402105] usb 1-6: USB disconnect, device number 3 [ 343.404651] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 343.494094] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 347.294035] usb 1-3: new high-speed USB device number 4 using ehci-pci [ 347.413045] usb 1-3: New USB device found, idVendor=125f, idProduct=a35a [ 347.413053] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 347.413056] usb 1-3: Product: HD650 [ 347.413058] usb 1-3: Manufacturer: ADATA [ 347.413061] usb 1-3: SerialNumber: 40A178432094 [ 347.415885] scsi host3: uas [ 347.426218] scsi 3:0:0:0: Direct-Access ADATA HD650 0 PQ: 0 ANSI: 6 [ 347.429558] sd 3:0:0:0: [sdb] Spinning up disk... [ 348.430042] ..ready [ 349.433412] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 349.433419] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 349.434885] sd 3:0:0:0: [sdb] Write Protect is off [ 349.434894] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 349.435638] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 349.505425] sdb: sdb1 sdb2 [ 349.509665] sd 3:0:0:0: [sdb] Attached SCSI disk [ 408.986776] ntfs: volume version 3.1. [ 410.278538] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 410.278546] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 410.278555] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 410.278557] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 410.278559] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 410.278561] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 410.329669] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 410.329677] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 421.843276] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 421.843286] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 421.843294] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 421.843296] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 421.843298] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 421.843300] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 421.843314] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 421.843316] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 498.772166] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 498.772174] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 498.772183] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 498.772185] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 498.772187] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 498.772189] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 498.772202] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 498.772204] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 533.999177] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 533.999185] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f59. [ 533.999189] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 533.999191] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f5b. [ 533.999195] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 533.999197] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f5d. [ 533.999199] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 533.999201] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f5e. [ 533.999204] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 533.999206] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f5f. [ 539.298136] __ntfs_error: 84 callbacks suppressed [ 539.298144] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 539.298148] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x60a8. [ 539.298174] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 539.298177] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x60a7. [ 539.377574] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 539.377583] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x60a9. [ 539.377586] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 539.377588] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x60aa. [ 539.377590] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 539.377592] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x60ab. [ 561.275160] __ntfs_error: 10 callbacks suppressed [ 561.275169] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 561.275172] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 561.275180] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 561.275182] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 561.275185] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 561.275187] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 561.275199] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 561.275201] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 562.022675] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 562.022686] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 570.430128] __ntfs_error: 6 callbacks suppressed [ 570.430136] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 570.430139] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048a. [ 570.430162] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 570.430165] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1045b. [ 570.432003] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 570.432049] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x10471. [ 570.432059] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 570.432062] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x10475. [ 570.432064] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 570.432066] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1047c. [ 582.006549] __ntfs_error: 6 callbacks suppressed [ 582.006556] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 582.006559] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048a. [ 582.006569] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 582.006571] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1045b. [ 582.006579] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 582.006581] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x10471. [ 582.006585] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 582.006587] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x10475. [ 582.006589] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 582.006591] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1047c. [ 681.503191] __ntfs_error: 22 callbacks suppressed [ 681.503199] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 681.503202] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 681.503211] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 681.503213] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 681.503215] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 681.503217] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 681.503230] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 681.503232] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 702.214166] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 702.214176] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 702.214186] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 702.214188] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 702.214190] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 702.214192] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 702.214205] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 702.214207] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 702.896622] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 702.896633] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 945.353921] __ntfs_error: 6 callbacks suppressed [ 945.353929] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 945.353931] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 945.353940] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 945.353942] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 945.353944] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 945.353946] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 945.353960] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 945.353962] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 945.989160] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 945.989169] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1104.256325] __ntfs_error: 6 callbacks suppressed [ 1104.256333] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1104.256336] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1104.256344] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1104.256346] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 1104.256348] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1104.256350] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 1104.256379] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1104.256381] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 1104.260151] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1104.260159] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1141.879404] __ntfs_error: 6 callbacks suppressed [ 1141.879413] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1141.879416] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1141.879425] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1141.879427] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 1141.879429] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1141.879431] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 1141.879444] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1141.879446] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 1141.883135] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1141.883142] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1197.088338] __ntfs_error: 6 callbacks suppressed [ 1197.088346] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1197.088349] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1197.088358] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1197.088360] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 1197.088362] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1197.088364] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 1197.088377] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1197.088378] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 1197.092142] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1197.092150] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1282.312154] __ntfs_error: 6 callbacks suppressed [ 1282.312162] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1282.312165] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1282.312174] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1282.312176] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 1282.312178] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1282.312180] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 1282.312192] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1282.312194] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 1334.869733] usb 1-3: USB disconnect, device number 4 [ 1334.881513] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [ 1334.971101] sd 3:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 1393.505034] usb 1-3: new high-speed USB device number 5 using ehci-pci [ 1393.624188] usb 1-3: New USB device found, idVendor=0951, idProduct=1646 [ 1393.624196] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1393.624199] usb 1-3: Product: DataTraveler 160 [ 1393.624202] usb 1-3: Manufacturer: Kingston [ 1393.624204] usb 1-3: SerialNumber: 001CC07CEBE1BB90816D000D [ 1393.626474] usb-storage 1-3:1.0: USB Mass Storage device detected [ 1393.627338] scsi host4: usb-storage 1-3:1.0 [ 1394.708733] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 160 PMAP PQ: 0 ANSI: 4 [ 1395.599291] sd 4:0:0:0: [sdc] 15470592 512-byte logical blocks: (7.92 GB/7.38 GiB) [ 1395.600676] sd 4:0:0:0: [sdc] Write Protect is off [ 1395.600686] sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 1395.602171] sd 4:0:0:0: [sdc] No Caching mode page found [ 1395.602177] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 1395.642832] sdc: sdc1 sdc2 [ 1395.647811] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 1405.539138] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 1409.604579] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 1661.108149] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1661.108156] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1661.108165] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1661.108167] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 1661.108169] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1661.108171] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 1661.108183] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1661.108185] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 1661.112150] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1661.112158] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1686.771600] __ntfs_error: 332 callbacks suppressed [ 1686.771607] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1686.771611] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1686.771620] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1686.771622] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 1686.771624] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1686.771626] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 1686.771639] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1686.771641] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 1686.775309] ntfs: (device sdb2): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x45c2cf8. [ 1686.775319] ntfs: (device sdb2): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x45c2cf9. [ 1701.599793] __ntfs_error: 62 callbacks suppressed [ 1701.599800] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1701.599803] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. [ 1701.599812] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1701.599814] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1048c. [ 1701.599816] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1701.599818] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x1064b. [ 1701.599830] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1701.599832] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5a09. [ 1701.607842] ntfs: (device sdb2): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. [ 1701.607851] ntfs: (device sdb2): ntfs_filldir(): Skipping unrepresentable inode 0x5f4d. #