FIC VA-503+

Ovladač:

v jádře

Technické parametry

Chipset VIA APOLLO MVP3

AT/ATX, Baby AT size, voltage 2.1-3.2V
AGP 1/2x, 3xPCI, 3xISA
2xDIMM 66/100MHz (max 2x256MB)
nebo 4xSIMM FPM,EDO (max 4x128MB)

core 66/75/83/95/100/112/124MHz
stepping 2/2.5/3/3.5/4/4.5/5/5.5x
512/1024KB onboard L2 cache (pipeline burst write-back)
Intel Pentium MMX, AMD K6/K6-2, Cyrix M II/6x86MX/6x86L, IBM 6x86MX/6x86L
2xbus master UDMA33(samozrejme umi i PIO3/4,DMA2)
I/O Winbond 83877TF(2xUART 16550 serial,1xEPP/ECP parallel,2xFDD)
heat sensor a remote ring-on konektory, podpora soft-off
onboard IrDa a 2xUSB - jen konektory

vyrobce:
http://www.fica.com/products/motherboard/Socket7/VA503plus.stm
manual:
ftp://ftp.fica.com/manuals/motherboards/VA-503+/

Identifikace pod Linuxem

Host bridge: VIA Technologies, Inc. VT82C597 [Apollo VP3] (rev 4).
PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (rev 0).
ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 71).
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
PCI bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16).

Postup zprovoznění pod Linuxem

chodi bez problemu, chipset je podporovan v kernelu
Doporucene volby pri kompilaci kernelu:
[*] Memory type range registers (MTRR) - pro prehravani videa
[*] VIA82CXXX chipset support - pro udma na secondary kanalu
[*] Use PCI DMA by default when available
[*] UHCI (Intel PIIX4, VIA, ...) support - pro USB
[*] ACPI support
nebo
[*] Advanced Power Management BIOS support
[*] Enhanced Real-Time Clock Support - pro prehravani videa

Poznámka

hint:
procesory Cyrix a IBM pouzivaji CPU->SRAM linear burst =>
specialni jumper a povolit v BIOSu (defaultne zakazano!)
modifikace VA503A ma 3xDIMM,4xPCI,1xISA,1xAMR a az 2MB L2 cache
Infraport lze dobastlit pomoci HSDL-1000 (~200Kc), konektory k USB (2*5 pinu) lze dokoupit (~100Kc).

Dokument vytvořil: Jiri Bajer, 17.4.2002 09:39 | Zobrazeno: 1315×