# dmesg [ 0.000000] microcode: microcode updated early to revision 0xdc, date = 2020-04-27 [ 0.000000] Linux version 5.8.6-050806-generic (kernel@gloin) (gcc (Ubuntu 10.2.0-5ubuntu2) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35) #202009030635 SMP Thu Sep 3 11:22:25 UTC 2020 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.6-050806-generic root=/dev/mapper/lvm-rootfs ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ab61bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab61c000-0x00000000ab61cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ab61d000-0x00000000ab61dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ab61e000-0x00000000b9d0dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9d0e000-0x00000000ba08efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ba08f000-0x00000000ba586fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba587000-0x00000000ba902fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ba903000-0x00000000baefefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000baeff000-0x00000000baefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000baf00000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xaa0af018-0xaa0bfe57] usable ==> usable [ 0.000000] e820: update [mem 0xaa0af018-0xaa0bfe57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000aa0af017] usable [ 0.000000] reserve setup_data: [mem 0x00000000aa0af018-0x00000000aa0bfe57] usable [ 0.000000] reserve setup_data: [mem 0x00000000aa0bfe58-0x00000000ab61bfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ab61c000-0x00000000ab61cfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000ab61d000-0x00000000ab61dfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ab61e000-0x00000000b9d0dfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b9d0e000-0x00000000ba08efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ba08f000-0x00000000ba586fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ba587000-0x00000000ba902fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000ba903000-0x00000000baefefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000baeff000-0x00000000baefffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000baf00000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043effffff] usable [ 0.000000] efi: EFI v2.50 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xba887000 ACPI=0xba887000 SMBIOS=0xbadcf000 SMBIOS 3.0=0xbadce000 ESRT=0xb88b2e58 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z170-D3H/Z170-D3H-CF, BIOS F22f 03/09/2018 [ 0.000000] tsc: Detected 3500.000 MHz processor [ 0.001045] tsc: Detected 3499.912 MHz TSC [ 0.001045] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001046] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001050] last_pfn = 0x43f000 max_arch_pfn = 0x400000000 [ 0.001052] MTRR default type: write-back [ 0.001053] MTRR fixed ranges enabled: [ 0.001054] 00000-9FFFF write-back [ 0.001054] A0000-BFFFF uncachable [ 0.001055] C0000-FFFFF write-protect [ 0.001055] MTRR variable ranges enabled: [ 0.001056] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.001057] 1 base 00BC000000 mask 7FFC000000 uncachable [ 0.001057] 2 base 00BB800000 mask 7FFF800000 uncachable [ 0.001057] 3 disabled [ 0.001058] 4 disabled [ 0.001058] 5 disabled [ 0.001058] 6 disabled [ 0.001058] 7 disabled [ 0.001059] 8 disabled [ 0.001059] 9 disabled [ 0.001305] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001411] last_pfn = 0xbaf00 max_arch_pfn = 0x400000000 [ 0.006604] esrt: Reserving ESRT space from 0x00000000b88b2e58 to 0x00000000b88b2e90. [ 0.006607] e820: update [mem 0xb88b2000-0xb88b2fff] usable ==> reserved [ 0.006615] check: Scanning 1 areas for low memory corruption [ 0.006618] Using GB pages for direct mapping [ 0.007087] Secure boot disabled [ 0.007087] RAMDISK: [mem 0x3ab4a000-0x3fffdfff] [ 0.007094] ACPI: Early table checksum verification disabled [ 0.007096] ACPI: RSDP 0x00000000BA887000 000024 (v02 ALASKA) [ 0.007098] ACPI: XSDT 0x00000000BA8870A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007101] ACPI: FACP 0x00000000BA8AF378 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.007104] ACPI: DSDT 0x00000000BA887200 028172 (v02 ALASKA A M I 01072009 INTL 20160422) [ 0.007106] ACPI: FACS 0x00000000BA902C40 000040 [ 0.007107] ACPI: APIC 0x00000000BA8AF490 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.007109] ACPI: FPDT 0x00000000BA8AF518 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007110] ACPI: MCFG 0x00000000BA8AF560 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.007112] ACPI: FIDT 0x00000000BA8AF5A0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007113] ACPI: SSDT 0x00000000BA8AF640 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.007115] ACPI: SSDT 0x00000000BA8B2798 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422) [ 0.007117] ACPI: HPET 0x00000000BA8B4CE0 000038 (v01 INTEL SKL 00000001 MSFT 0000005F) [ 0.007118] ACPI: SSDT 0x00000000BA8B4D18 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422) [ 0.007120] ACPI: SSDT 0x00000000BA8B5B58 002AD7 (v02 INTEL xh_rvp10 00000000 INTL 20160422) [ 0.007122] ACPI: UEFI 0x00000000BA8B8630 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.007123] ACPI: SSDT 0x00000000BA8B8678 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.007125] ACPI: LPIT 0x00000000BA8B9558 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.007126] ACPI: WSMT 0x00000000BA8B95F0 000028 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.007128] ACPI: SSDT 0x00000000BA8B9618 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.007129] ACPI: SSDT 0x00000000BA8B98B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.007131] ACPI: DBGP 0x00000000BA8BC8C0 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.007132] ACPI: DBG2 0x00000000BA8BC8F8 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.007134] ACPI: BGRT 0x00000000BA8BC950 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007135] ACPI: DMAR 0x00000000BA8BC988 0000A8 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.007141] ACPI: Local APIC address 0xfee00000 [ 0.007227] No NUMA configuration found [ 0.007227] Faking a node at [mem 0x0000000000000000-0x000000043effffff] [ 0.007234] NODE_DATA(0) allocated [mem 0x43efd6000-0x43effffff] [ 0.007444] Zone ranges: [ 0.007445] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.007445] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.007446] Normal [mem 0x0000000100000000-0x000000043effffff] [ 0.007447] Device empty [ 0.007447] Movable zone start for each node [ 0.007449] Early memory node ranges [ 0.007450] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.007450] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.007450] node 0: [mem 0x0000000000100000-0x00000000ab61bfff] [ 0.007451] node 0: [mem 0x00000000ab61e000-0x00000000b9d0dfff] [ 0.007451] node 0: [mem 0x00000000ba08f000-0x00000000ba586fff] [ 0.007452] node 0: [mem 0x00000000baeff000-0x00000000baefffff] [ 0.007452] node 0: [mem 0x0000000100000000-0x000000043effffff] [ 0.007616] Zeroed struct page in unavailable ranges: 28255 pages [ 0.007617] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff] [ 0.007618] On node 0 totalpages: 4166049 [ 0.007619] DMA zone: 64 pages used for memmap [ 0.007619] DMA zone: 22 pages reserved [ 0.007619] DMA zone: 3996 pages, LIFO batch:0 [ 0.007635] DMA32 zone: 11849 pages used for memmap [ 0.007635] DMA32 zone: 758277 pages, LIFO batch:63 [ 0.011300] Normal zone: 53184 pages used for memmap [ 0.011301] Normal zone: 3403776 pages, LIFO batch:63 [ 0.028136] Reserving Intel graphics memory at [mem 0xbc000000-0xbfffffff] [ 0.028312] ACPI: PM-Timer IO Port: 0x1808 [ 0.028313] ACPI: Local APIC address 0xfee00000 [ 0.028317] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028317] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028318] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028318] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.028344] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.028345] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028346] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028346] ACPI: IRQ0 used by override. [ 0.028347] ACPI: IRQ9 used by override. [ 0.028348] Using ACPI (MADT) for SMP configuration information [ 0.028349] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.028353] e820: update [mem 0xb6e63000-0xb6ea7fff] usable ==> reserved [ 0.028358] TSC deadline timer available [ 0.028359] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028370] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028371] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.028372] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.028372] PM: hibernation: Registered nosave memory: [mem 0xaa0af000-0xaa0affff] [ 0.028373] PM: hibernation: Registered nosave memory: [mem 0xaa0bf000-0xaa0bffff] [ 0.028374] PM: hibernation: Registered nosave memory: [mem 0xab61c000-0xab61cfff] [ 0.028374] PM: hibernation: Registered nosave memory: [mem 0xab61d000-0xab61dfff] [ 0.028375] PM: hibernation: Registered nosave memory: [mem 0xb6e63000-0xb6ea7fff] [ 0.028376] PM: hibernation: Registered nosave memory: [mem 0xb88b2000-0xb88b2fff] [ 0.028377] PM: hibernation: Registered nosave memory: [mem 0xb9d0e000-0xba08efff] [ 0.028378] PM: hibernation: Registered nosave memory: [mem 0xba587000-0xba902fff] [ 0.028378] PM: hibernation: Registered nosave memory: [mem 0xba903000-0xbaefefff] [ 0.028379] PM: hibernation: Registered nosave memory: [mem 0xbaf00000-0xbfffffff] [ 0.028380] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff] [ 0.028380] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.028380] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfdffffff] [ 0.028381] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.028381] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.028381] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.028382] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.028382] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.028382] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.028382] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028383] [mem 0xc0000000-0xefffffff] available for PCI devices [ 0.028384] Booting paravirtualized kernel on bare hardware [ 0.028386] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.028390] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.028488] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288 [ 0.028492] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152 [ 0.028493] pcpu-alloc: [0] 0 1 2 3 [ 0.028509] Built 1 zonelists, mobility grouping on. Total pages: 4100930 [ 0.028509] Policy zone: Normal [ 0.028510] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.6-050806-generic root=/dev/mapper/lvm-rootfs ro quiet splash [ 0.029066] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.029318] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.029349] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.057761] Memory: 15929800K/16664196K available (14339K kernel code, 2556K rwdata, 8740K rodata, 2632K init, 4904K bss, 734396K reserved, 0K cma-reserved) [ 0.057766] random: get_random_u64 called from kmem_cache_open+0x2b/0x240 with crng_init=0 [ 0.057844] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.057853] Kernel/User page tables isolation: enabled [ 0.057865] ftrace: allocating 48518 entries in 190 pages [ 0.069736] ftrace: allocated 190 pages with 6 groups [ 0.069806] rcu: Hierarchical RCU implementation. [ 0.069807] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.069808] Trampoline variant of Tasks RCU enabled. [ 0.069808] Rude variant of Tasks RCU enabled. [ 0.069808] Tracing variant of Tasks RCU enabled. [ 0.069809] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.069809] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.071870] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.072288] random: crng done (trusting CPU's manufacturer) [ 0.072305] Console: colour dummy device 80x25 [ 0.072308] printk: console [tty0] enabled [ 0.072320] ACPI: Core revision 20200528 [ 0.072553] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.072637] APIC: Switch to symmetric I/O mode setup [ 0.072638] DMAR: Host address width 39 [ 0.072639] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.072643] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.072643] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.072646] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.072646] DMAR: RMRR base: 0x000000ba009000 end: 0x000000ba028fff [ 0.072647] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bfffffff [ 0.072649] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.072649] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.072650] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.074090] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.074091] x2apic enabled [ 0.074103] Switched APIC routing to cluster x2apic. [ 0.078190] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.096620] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3272fd97217, max_idle_ns: 440795241220 ns [ 0.096623] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.82 BogoMIPS (lpj=13999648) [ 0.096624] pid_max: default: 32768 minimum: 301 [ 0.101672] LSM: Security Framework initializing [ 0.101680] Yama: becoming mindful. [ 0.101707] AppArmor: AppArmor initialized [ 0.101746] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.101764] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.101943] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.101958] process: using mwait in idle threads [ 0.101959] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 [ 0.101960] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.101962] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.101962] Spectre V2 : Mitigation: Full generic retpoline [ 0.101963] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.101963] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.101964] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.101964] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.101966] TAA: Mitigation: Clear CPU buffers [ 0.101968] SRBDS: Mitigation: Microcode [ 0.101968] MDS: Mitigation: Clear CPU buffers [ 0.102153] Freeing SMP alternatives memory: 40K [ 0.103671] smpboot: CPU0: Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.103771] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.103775] ... version: 4 [ 0.103776] ... bit width: 48 [ 0.103776] ... generic registers: 8 [ 0.103776] ... value mask: 0000ffffffffffff [ 0.103777] ... max period: 00007fffffffffff [ 0.103777] ... fixed-purpose events: 3 [ 0.103777] ... event mask: 00000007000000ff [ 0.103801] rcu: Hierarchical SRCU implementation. [ 0.104233] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.104266] smp: Bringing up secondary CPUs ... [ 0.104317] x86: Booting SMP configuration: [ 0.104317] .... node #0, CPUs: #1 #2 #3 [ 0.106172] smp: Brought up 1 node, 4 CPUs [ 0.106172] smpboot: Max logical packages: 1 [ 0.106172] smpboot: Total of 4 processors activated (27999.29 BogoMIPS) [ 0.106172] devtmpfs: initialized [ 0.106172] x86/mm: Memory block size: 128MB [ 0.106172] PM: Registering ACPI NVS region [mem 0xab61c000-0xab61cfff] (4096 bytes) [ 0.106172] PM: Registering ACPI NVS region [mem 0xba587000-0xba902fff] (3653632 bytes) [ 0.106172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.106172] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.106172] pinctrl core: initialized pinctrl subsystem [ 0.108624] PM: RTC time: 12:22:40, date: 2020-09-05 [ 0.108626] thermal_sys: Registered thermal governor 'fair_share' [ 0.108626] thermal_sys: Registered thermal governor 'bang_bang' [ 0.108626] thermal_sys: Registered thermal governor 'step_wise' [ 0.108627] thermal_sys: Registered thermal governor 'user_space' [ 0.108627] thermal_sys: Registered thermal governor 'power_allocator' [ 0.108702] NET: Registered protocol family 16 [ 0.108847] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.108939] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.109034] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.109040] audit: initializing netlink subsys (disabled) [ 0.109047] audit: type=2000 audit(1599308560.036:1): state=initialized audit_enabled=0 res=1 [ 0.109047] EISA bus registered [ 0.109047] cpuidle: using governor ladder [ 0.109047] cpuidle: using governor menu [ 0.109047] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.109047] ACPI: bus type PCI registered [ 0.109047] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.109047] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.109047] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.109047] PCI: Using configuration type 1 for base access [ 0.109902] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.109902] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.109902] ACPI: Added _OSI(Module Device) [ 0.109902] ACPI: Added _OSI(Processor Device) [ 0.109902] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.109902] ACPI: Added _OSI(Processor Aggregator Device) [ 0.109902] ACPI: Added _OSI(Linux-Dell-Video) [ 0.109902] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.109902] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.144958] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.147350] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.150930] ACPI: Dynamic OEM Table Load: [ 0.150935] ACPI: SSDT 0xFFFF9529EC151800 000738 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.152202] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.153495] ACPI: Dynamic OEM Table Load: [ 0.153498] ACPI: SSDT 0xFFFF9529EC08B000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.154958] ACPI: Dynamic OEM Table Load: [ 0.154961] ACPI: SSDT 0xFFFF9529EC150800 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.156434] ACPI: Dynamic OEM Table Load: [ 0.156437] ACPI: SSDT 0xFFFF9529EC0CCE00 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.159904] ACPI: Interpreter enabled [ 0.159935] ACPI: (supports S0 S3 S4 S5) [ 0.159936] ACPI: Using IOAPIC for interrupt routing [ 0.159965] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.160920] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.163092] ACPI: Power Resource [PG00] (on) [ 0.163460] ACPI: Power Resource [PG01] (on) [ 0.163819] ACPI: Power Resource [PG02] (on) [ 0.165973] ACPI: Power Resource [WRST] (on) [ 0.166287] ACPI: Power Resource [WRST] (on) [ 0.166604] ACPI: Power Resource [WRST] (on) [ 0.166917] ACPI: Power Resource [WRST] (on) [ 0.167231] ACPI: Power Resource [WRST] (on) [ 0.167556] ACPI: Power Resource [WRST] (on) [ 0.167867] ACPI: Power Resource [WRST] (on) [ 0.168180] ACPI: Power Resource [WRST] (on) [ 0.168494] ACPI: Power Resource [WRST] (on) [ 0.168810] ACPI: Power Resource [WRST] (on) [ 0.169127] ACPI: Power Resource [WRST] (on) [ 0.169443] ACPI: Power Resource [WRST] (on) [ 0.169757] ACPI: Power Resource [WRST] (on) [ 0.170069] ACPI: Power Resource [WRST] (on) [ 0.170381] ACPI: Power Resource [WRST] (on) [ 0.170702] ACPI: Power Resource [WRST] (on) [ 0.171019] ACPI: Power Resource [WRST] (on) [ 0.172207] ACPI: Power Resource [WRST] (on) [ 0.172521] ACPI: Power Resource [WRST] (on) [ 0.172842] ACPI: Power Resource [WRST] (on) [ 0.185946] ACPI: Power Resource [FN00] (off) [ 0.186028] ACPI: Power Resource [FN01] (off) [ 0.186107] ACPI: Power Resource [FN02] (off) [ 0.186186] ACPI: Power Resource [FN03] (off) [ 0.186267] ACPI: Power Resource [FN04] (off) [ 0.187240] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.187246] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.187281] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.187868] PCI host bridge to bus 0000:00 [ 0.187870] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.187870] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.187871] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.187872] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.187872] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.187873] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.187874] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.187874] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.187875] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.187875] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.187876] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.187877] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.187877] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.187878] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.187878] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.187879] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff window] [ 0.187880] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.187880] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.187888] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000 [ 0.188210] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 [ 0.188218] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit] [ 0.188221] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.188224] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.188237] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.188414] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.188432] pci 0000:00:14.0: reg 0x10: [mem 0xef130000-0xef13ffff 64bit] [ 0.188488] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.188709] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.188731] pci 0000:00:16.0: reg 0x10: [mem 0xef14d000-0xef14dfff 64bit] [ 0.188795] pci 0000:00:16.0: PME# supported from D3hot [ 0.188952] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 0.188966] pci 0000:00:17.0: reg 0x10: [mem 0xef148000-0xef149fff] [ 0.188972] pci 0000:00:17.0: reg 0x14: [mem 0xef14c000-0xef14c0ff] [ 0.188977] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.188982] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.188988] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.188993] pci 0000:00:17.0: reg 0x24: [mem 0xef14b000-0xef14b7ff] [ 0.189026] pci 0000:00:17.0: PME# supported from D3hot [ 0.189166] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400 [ 0.189221] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.189392] pci 0000:00:1b.2: [8086:a169] type 01 class 0x060400 [ 0.189451] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold [ 0.189621] pci 0000:00:1b.3: [8086:a16a] type 01 class 0x060400 [ 0.189680] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold [ 0.189864] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 [ 0.189928] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.190101] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400 [ 0.190161] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.190331] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400 [ 0.190392] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.190562] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400 [ 0.190622] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.190790] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400 [ 0.190851] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.191019] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 [ 0.191086] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.191286] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100 [ 0.191511] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.191523] pci 0000:00:1f.2: reg 0x10: [mem 0xef144000-0xef147fff] [ 0.191687] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.191709] pci 0000:00:1f.3: reg 0x10: [mem 0xef140000-0xef143fff 64bit] [ 0.191730] pci 0000:00:1f.3: reg 0x20: [mem 0xef120000-0xef12ffff 64bit] [ 0.191772] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.191969] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.192029] pci 0000:00:1f.4: reg 0x10: [mem 0xef14a000-0xef14a0ff 64bit] [ 0.192098] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.192306] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 [ 0.192331] pci 0000:00:1f.6: reg 0x10: [mem 0xef100000-0xef11ffff] [ 0.192431] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.192644] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 0.192737] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060400 [ 0.192872] pci 0000:02:00.0: supports D1 D2 [ 0.192872] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192986] pci 0000:00:1b.2: PCI bridge to [bus 02-03] [ 0.193034] pci_bus 0000:03: extended config space not accessible [ 0.193096] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.193189] pci 0000:00:1b.3: PCI bridge to [bus 04] [ 0.193275] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.193352] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.193427] pci 0000:00:1c.5: PCI bridge to [bus 07] [ 0.193503] pci 0000:00:1c.6: PCI bridge to [bus 08] [ 0.193591] pci 0000:09:00.0: [168c:0030] type 00 class 0x028000 [ 0.193617] pci 0000:09:00.0: reg 0x10: [mem 0xef000000-0xef01ffff 64bit] [ 0.193647] pci 0000:09:00.0: reg 0x30: [mem 0xef020000-0xef02ffff pref] [ 0.193714] pci 0000:09:00.0: supports D1 [ 0.193714] pci 0000:09:00.0: PME# supported from D0 D1 D3hot [ 0.193839] pci 0000:00:1c.7: PCI bridge to [bus 09] [ 0.193842] pci 0000:00:1c.7: bridge window [mem 0xef000000-0xef0fffff] [ 0.193919] pci 0000:00:1d.0: PCI bridge to [bus 0a] [ 0.195978] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.196030] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.196081] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.196131] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.196181] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.196231] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.196280] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.196330] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.196876] iommu: Default domain type: Translated [ 0.196876] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.196876] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.196876] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.196876] vgaarb: loaded [ 0.196876] SCSI subsystem initialized [ 0.196876] libata version 3.00 loaded. [ 0.196876] ACPI: bus type USB registered [ 0.196876] usbcore: registered new interface driver usbfs [ 0.196876] usbcore: registered new interface driver hub [ 0.196876] usbcore: registered new device driver usb [ 0.196876] pps_core: LinuxPPS API ver. 1 registered [ 0.196876] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.196876] PTP clock support registered [ 0.196876] EDAC MC: Ver: 3.0.0 [ 0.196876] Registered efivars operations [ 0.196876] NetLabel: Initializing [ 0.196876] NetLabel: domain hash size = 128 [ 0.196876] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.196876] NetLabel: unlabeled traffic allowed by default [ 0.196876] PCI: Using ACPI for IRQ routing [ 0.210295] PCI: pci_cache_line_size set to 64 bytes [ 0.210349] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.210350] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.210350] e820: reserve RAM buffer [mem 0xaa0af018-0xabffffff] [ 0.210351] e820: reserve RAM buffer [mem 0xab61c000-0xabffffff] [ 0.210351] e820: reserve RAM buffer [mem 0xb6e63000-0xb7ffffff] [ 0.210352] e820: reserve RAM buffer [mem 0xb88b2000-0xbbffffff] [ 0.210353] e820: reserve RAM buffer [mem 0xb9d0e000-0xbbffffff] [ 0.210353] e820: reserve RAM buffer [mem 0xba587000-0xbbffffff] [ 0.210354] e820: reserve RAM buffer [mem 0xbaf00000-0xbbffffff] [ 0.210354] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] [ 0.210356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.210356] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.212633] clocksource: Switched to clocksource tsc-early [ 0.221901] VFS: Disk quotas dquot_6.6.0 [ 0.221911] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.221978] AppArmor: AppArmor Filesystem Enabled [ 0.221997] pnp: PnP ACPI init [ 0.222287] system 00:00: [io 0x0a00-0x0a2f] has been reserved [ 0.222288] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 0.222289] system 00:00: [io 0x0a40-0x0a4f] has been reserved [ 0.222292] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.222692] pnp 00:01: [dma 0 disabled] [ 0.222723] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.222842] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.222843] system 00:02: [io 0xffff] has been reserved [ 0.222844] system 00:02: [io 0xffff] has been reserved [ 0.222845] system 00:02: [io 0xffff] has been reserved [ 0.222846] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.222847] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.222849] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.222927] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.222929] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.222944] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.222973] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.222975] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.223202] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.223203] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.223204] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.223205] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.223206] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.223207] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.223207] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.223208] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.223209] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.223210] system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved [ 0.223212] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.223245] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.223246] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.223247] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.223247] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.223248] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.223249] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.223250] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.223252] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.223531] system 00:08: [io 0xff00-0xfffe] has been reserved [ 0.223533] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.224688] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.224689] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.224689] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.224691] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.225566] pnp: PnP ACPI: found 10 devices [ 0.230824] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.230863] NET: Registered protocol family 2 [ 0.230966] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.231022] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.231144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.231218] TCP: Hash tables configured (established 131072 bind 65536) [ 0.231275] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.231304] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.231343] NET: Registered protocol family 1 [ 0.231346] NET: Registered protocol family 44 [ 0.231355] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 0.231362] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.231376] pci 0000:00:1b.2: PCI bridge to [bus 02-03] [ 0.231382] pci 0000:00:1b.3: PCI bridge to [bus 04] [ 0.231387] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.231395] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.231401] pci 0000:00:1c.5: PCI bridge to [bus 07] [ 0.231408] pci 0000:00:1c.6: PCI bridge to [bus 08] [ 0.231414] pci 0000:00:1c.7: PCI bridge to [bus 09] [ 0.231417] pci 0000:00:1c.7: bridge window [mem 0xef000000-0xef0fffff] [ 0.231421] pci 0000:00:1d.0: PCI bridge to [bus 0a] [ 0.231428] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.231429] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.231430] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.231430] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.231431] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.231432] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.231432] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.231433] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.231434] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.231434] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.231435] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.231435] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.231436] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.231437] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.231437] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.231438] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xefffffff window] [ 0.231439] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window] [ 0.231440] pci_bus 0000:09: resource 1 [mem 0xef000000-0xef0fffff] [ 0.231563] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.231795] pci 0000:02:00.0: Disabling ASPM L0s/L1 [ 0.231796] pci 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.231801] PCI: CLS 64 bytes, default 64 [ 0.231827] Trying to unpack rootfs image as initramfs... [ 0.378808] Freeing initrd memory: 86736K [ 0.388705] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.388706] software IO TLB: mapped [mem 0xa60af000-0xaa0af000] (64MB) [ 0.388869] check: Scanning for low memory corruption every 60 seconds [ 0.389139] Initialise system trusted keyrings [ 0.389148] Key type blacklist registered [ 0.389165] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.389978] zbud: loaded [ 0.390135] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.390224] fuse: init (API version 7.31) [ 0.390303] integrity: Platform Keyring initialized [ 0.396555] Key type asymmetric registered [ 0.396555] Asymmetric key parser 'x509' registered [ 0.396560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.396591] io scheduler mq-deadline registered [ 0.397821] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.397861] efifb: probing for efifb [ 0.397871] efifb: Ignoring BGRT: unexpected or invalid BMP data [ 0.397872] efifb: framebuffer at 0xd0000000, using 1876k, total 1875k [ 0.397872] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 0.397873] efifb: scrolling: redraw [ 0.397874] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.397901] fbcon: Deferring console take-over [ 0.397901] fb0: EFI VGA frame buffer device [ 0.397907] intel_idle: MWAIT substates: 0x142120 [ 0.397907] intel_idle: v0.5.1 model 0x5E [ 0.398022] intel_idle: Local APIC timer is reliable in all C-states [ 0.398175] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.398189] ACPI: Sleep Button [SLPB] [ 0.398206] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.398215] ACPI: Power Button [PWRB] [ 0.398231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.398247] ACPI: Power Button [PWRF] [ 0.398990] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.398990] ACPI: Thermal Zone [TZ00] (28 C) [ 0.399115] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.399115] ACPI: Thermal Zone [TZ01] (30 C) [ 0.399300] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.420058] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.422372] Linux agpgart interface v0.103 [ 0.423551] loop: module loaded [ 0.423706] libphy: Fixed MDIO Bus: probed [ 0.423707] tun: Universal TUN/TAP device driver, 1.6 [ 0.423720] PPP generic driver version 2.4.2 [ 0.423850] VFIO - User Level meta-driver version: 0.3 [ 0.424076] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.424078] ehci-pci: EHCI PCI platform driver [ 0.424084] ehci-platform: EHCI generic platform driver [ 0.424089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.424091] ohci-pci: OHCI PCI platform driver [ 0.424095] ohci-platform: OHCI generic platform driver [ 0.424111] uhci_hcd: USB Universal Host Controller Interface driver [ 0.424132] i8042: PNP: No PS/2 controller found. [ 0.424346] mousedev: PS/2 mouse device common for all mice [ 0.424496] rtc_cmos 00:04: RTC can wake from S4 [ 0.424999] rtc_cmos 00:04: registered as rtc0 [ 0.425120] rtc_cmos 00:04: setting system clock to 2020-09-05T12:22:41 UTC (1599308561) [ 0.425131] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.425134] i2c /dev entries driver [ 0.425183] device-mapper: uevent: version 1.0.3 [ 0.425255] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com [ 0.425266] platform eisa.0: Probing EISA bus 0 [ 0.425267] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.425268] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.425268] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.425269] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.425269] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.425270] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.425270] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.425271] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.425271] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.425272] platform eisa.0: EISA: Detected 0 cards [ 0.425274] intel_pstate: Intel P-state driver initializing [ 0.425505] intel_pstate: HWP enabled [ 0.425619] ledtrig-cpu: registered to indicate activity on CPUs [ 0.425621] EFI Variables Facility v0.08 2004-May-17 [ 0.452803] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff] [ 0.452806] caller pmc_core_probe+0x7f/0x180 mapping multiple BARs [ 0.452815] intel_pmc_core INT33A1:00: initialized [ 0.452866] drop_monitor: Initializing network drop monitor service [ 0.452993] NET: Registered protocol family 10 [ 0.457236] Segment Routing with IPv6 [ 0.457248] NET: Registered protocol family 17 [ 0.457328] Key type dns_resolver registered [ 0.457574] microcode: sig=0x506e3, pf=0x2, revision=0xdc [ 0.457646] microcode: Microcode Update Driver: v2.2. [ 0.457649] IPI shorthand broadcast: enabled [ 0.457653] sched_clock: Marking stable (457202923, 441187)->(461056957, -3412847) [ 0.457780] registered taskstats version 1 [ 0.457788] Loading compiled-in X.509 certificates [ 0.458258] Loaded X.509 cert 'Build time autogenerated kernel key: a34a5bab49ea1d8cd603e0d894f6b56f2ac25b56' [ 0.458274] zswap: loaded using pool lzo/zbud [ 0.458380] Key type ._fscrypt registered [ 0.458381] Key type .fscrypt registered [ 0.458381] Key type fscrypt-provisioning registered [ 0.460255] Key type encrypted registered [ 0.460257] AppArmor: AppArmor sha1 policy hashing enabled [ 0.462026] ima: No TPM chip found, activating TPM-bypass! [ 0.462029] ima: Allocated hash algorithm: sha1 [ 0.462032] ima: No architecture policies found [ 0.462038] evm: Initialising EVM extended attributes: [ 0.462038] evm: security.selinux [ 0.462038] evm: security.SMACK64 [ 0.462039] evm: security.SMACK64EXEC [ 0.462039] evm: security.SMACK64TRANSMUTE [ 0.462039] evm: security.SMACK64MMAP [ 0.462040] evm: security.apparmor [ 0.462040] evm: security.ima [ 0.462040] evm: security.capability [ 0.462041] evm: HMAC attrs: 0x1 [ 0.463410] PM: Magic number: 4:488:379 [ 0.463555] RAS: Correctable Errors collector initialized. [ 0.464389] Freeing unused decrypted memory: 2040K [ 0.464686] Freeing unused kernel image (initmem) memory: 2632K [ 0.484947] Write protecting the kernel read-only data: 26624k [ 0.485496] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 0.485729] Freeing unused kernel image (rodata/data gap) memory: 1500K [ 0.526579] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.526580] x86/mm: Checking user space page tables [ 0.565885] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.565887] Run /init as init process [ 0.565888] with arguments: [ 0.565889] /init [ 0.565889] splash [ 0.565889] with environment: [ 0.565890] HOME=/ [ 0.565890] TERM=linux [ 0.565890] BOOT_IMAGE=/boot/vmlinuz-5.8.6-050806-generic [ 0.639751] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.639755] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.640172] ahci 0000:00:17.0: version 3.0 [ 0.641095] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 [ 0.641307] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.641455] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.641456] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.641457] usb usb1: Product: xHCI Host Controller [ 0.641458] usb usb1: Manufacturer: Linux 5.8.6-050806-generic xhci-hcd [ 0.641458] usb usb1: SerialNumber: 0000:00:14.0 [ 0.641569] hub 1-0:1.0: USB hub found [ 0.641602] hub 1-0:1.0: 16 ports detected [ 0.643342] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.643343] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.643345] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.643367] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 0.643368] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.643369] usb usb2: Product: xHCI Host Controller [ 0.643369] usb usb2: Manufacturer: Linux 5.8.6-050806-generic xhci-hcd [ 0.643370] usb usb2: SerialNumber: 0000:00:14.0 [ 0.643426] hub 2-0:1.0: USB hub found [ 0.643436] hub 2-0:1.0: 10 ports detected [ 0.652658] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.652660] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 0.658244] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.658245] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.658421] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.659443] cryptd: max_cpu_qlen set to 1000 [ 0.662501] AVX2 version of gcm_enc/dec engaged. [ 0.662501] AES CTR mode by8 optimization enabled [ 0.667549] i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003) [ 0.667731] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.667761] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.669240] i2c i2c-0: 2/4 memory slots populated (from DMI) [ 0.669749] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.670322] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 0.693089] checking generic (d0000000 1d5000) vs hw (ee000000 1000000) [ 0.693090] checking generic (d0000000 1d5000) vs hw (d0000000 10000000) [ 0.693091] fb0: switching to inteldrmfb from EFI VGA [ 0.693147] i915 0000:00:02.0: vgaarb: deactivate vga console [ 0.704655] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.708714] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.709005] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 0.713014] scsi host0: ahci [ 0.713094] scsi host1: ahci [ 0.713151] scsi host2: ahci [ 0.713210] scsi host3: ahci [ 0.713262] scsi host4: ahci [ 0.713314] scsi host5: ahci [ 0.713346] ata1: SATA max UDMA/133 abar m2048@0xef14b000 port 0xef14b100 irq 131 [ 0.713348] ata2: SATA max UDMA/133 abar m2048@0xef14b000 port 0xef14b180 irq 131 [ 0.713349] ata3: SATA max UDMA/133 abar m2048@0xef14b000 port 0xef14b200 irq 131 [ 0.713351] ata4: SATA max UDMA/133 abar m2048@0xef14b000 port 0xef14b280 irq 131 [ 0.713352] ata5: SATA max UDMA/133 abar m2048@0xef14b000 port 0xef14b300 irq 131 [ 0.713354] ata6: SATA max UDMA/133 abar m2048@0xef14b000 port 0xef14b380 irq 131 [ 0.890106] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 0.968825] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 40:8d:5c:b0:95:a1 [ 0.968826] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 0.968881] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 0.978840] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP [ 0.980673] usb 1-6: new full-speed USB device number 2 using xhci_hcd [ 0.985679] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.019783] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0 [ 1.022516] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.022792] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.028734] ata5: SATA link down (SStatus 0 SControl 300) [ 1.028781] ata4: SATA link down (SStatus 0 SControl 300) [ 1.028874] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.030590] ata1.00: supports DRM functions and may not be fully accessible [ 1.031582] ata1.00: disabling queued TRIM support [ 1.031583] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 1.031584] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.032657] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.032767] ata2: SATA link down (SStatus 0 SControl 300) [ 1.033202] ata1.00: supports DRM functions and may not be fully accessible [ 1.033594] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 1.033595] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.033887] ata1.00: disabling queued TRIM support [ 1.034789] ata3.00: configured for UDMA/133 [ 1.034991] ata1.00: configured for UDMA/133 [ 1.035101] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 1.035298] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.035303] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.035308] sd 0:0:0:0: [sda] Write Protect is off [ 1.035309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.035330] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.035551] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 1.035703] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.035705] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.035708] sd 2:0:0:0: [sdb] Write Protect is off [ 1.035709] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.035716] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.036834] ata6: SATA link down (SStatus 0 SControl 300) [ 1.059291] sda: sda1 sda2 sda3 [ 1.060485] sd 0:0:0:0: [sda] supports TCG Opal [ 1.060487] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.140448] usb 1-6: New USB device found, idVendor=0d8c, idProduct=0043, bcdDevice= 1.05 [ 1.140467] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.140468] usb 1-6: Product: USB Advanced Audio Device [ 1.140469] usb 1-6: Manufacturer: C-Media Electronics Inc. [ 1.144245] hid: raw HID events driver (C) Jiri Kosina [ 1.146768] fbcon: i915drmfb (fb0) is primary device [ 1.146768] fbcon: Deferring console take-over [ 1.146770] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 1.146878] usbcore: registered new interface driver usbhid [ 1.146878] usbhid: USB HID core driver [ 1.148468] input: C-Media Electronics Inc. USB Advanced Audio Device as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.3/0003:0D8C:0043.0001/input/input4 [ 1.204977] hid-generic 0003:0D8C:0043.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB Advanced Audio Device] on usb-0000:00:14.0-6/input3 [ 1.272705] usb 1-10: new high-speed USB device number 3 using xhci_hcd [ 1.399228] sdb: sdb1 [ 1.399518] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.416665] tsc: Refined TSC clocksource calibration: 3503.998 MHz [ 1.416677] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x328211acd6a, max_idle_ns: 440795259903 ns [ 1.416761] clocksource: Switched to clocksource tsc [ 1.422010] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 [ 1.422011] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.422012] usb 1-10: Product: USB2.0 Hub [ 1.422885] hub 1-10:1.0: USB hub found [ 1.423149] hub 1-10:1.0: 4 ports detected [ 1.552883] usb 1-13: new full-speed USB device number 4 using xhci_hcd [ 1.708778] ata3.00: exception Emask 0x50 SAct 0x100 SErr 0x40d0802 action 0xe frozen [ 1.708798] fbcon: Taking over console [ 1.708799] ata3.00: irq_stat 0x00400040, connection status changed [ 1.708801] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 1.708803] ata3.00: failed command: READ FPDMA QUEUED [ 1.708806] ata3.00: cmd 60/08:40:00:88:e0/00:00:e8:00:00/40 tag 8 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 1.708807] ata3.00: status: { DRDY } [ 1.708809] ata3: hard resetting link [ 1.711643] usb 1-13: New USB device found, idVendor=045e, idProduct=0768, bcdDevice= 1.50 [ 1.711644] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.711645] usb 1-13: Product: Microsoft® SiderWinderTM X4 Keyboard [ 1.711645] usb 1-13: Manufacturer: Microsoft [ 1.716380] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:045E:0768.0002/input/input5 [ 1.720137] Console: switching to colour frame buffer device 240x67 [ 1.773176] hid-generic 0003:045E:0768.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:14.0-13/input0 [ 1.782400] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:045E:0768.0003/input/input6 [ 1.841069] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:045E:0768.0003/input/input7 [ 1.841236] hid-generic 0003:045E:0768.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:14.0-13/input1 [ 1.968905] usb 1-14: new low-speed USB device number 5 using xhci_hcd [ 2.123142] usb 1-14: New USB device found, idVendor=046d, idProduct=c062, bcdDevice=31.00 [ 2.123144] usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.123145] usb 1-14: Product: USB Laser Mouse [ 2.123145] usb 1-14: Manufacturer: Logitech [ 2.128653] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:046D:C062.0004/input/input8 [ 2.129011] hid-generic 0003:046D:C062.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-14/input0 [ 3.140882] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.141413] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3.141415] ata3.00: revalidation failed (errno=-2) [ 8.228908] ata3: hard resetting link [ 8.543005] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.543524] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 8.543526] ata3.00: revalidation failed (errno=-2) [ 13.604913] ata3: hard resetting link [ 13.919156] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.919570] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 13.919571] ata3.00: revalidation failed (errno=-2) [ 13.919604] ata3.00: disabled [ 18.980910] ata3: hard resetting link [ 19.295176] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 19.295700] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 19.295726] sd 2:0:0:0: [sdb] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=17s [ 19.295728] sd 2:0:0:0: [sdb] tag#8 Sense Key : Illegal Request [current] [ 19.295729] sd 2:0:0:0: [sdb] tag#8 Add. Sense: Unaligned write command [ 19.295730] sd 2:0:0:0: [sdb] tag#8 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 19.295732] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 19.295788] ata3: EH complete [ 19.295796] ata3.00: detaching (SCSI 2:0:0:0) [ 19.295826] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 19.295884] Buffer I/O error on dev sdb, logical block 488378624, async page read [ 19.296457] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 19.296475] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 19.296475] sd 2:0:0:0: [sdb] Stopping disk [ 19.296478] sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 23.284649] raid6: avx2x4 gen() 41136 MB/s [ 23.352648] raid6: avx2x4 xor() 15253 MB/s [ 23.420648] raid6: avx2x2 gen() 42523 MB/s [ 23.488648] raid6: avx2x2 xor() 25281 MB/s [ 23.556648] raid6: avx2x1 gen() 35830 MB/s [ 23.624648] raid6: avx2x1 xor() 19238 MB/s [ 23.692648] raid6: sse2x4 gen() 17494 MB/s [ 23.760649] raid6: sse2x4 xor() 8277 MB/s [ 23.828647] raid6: sse2x2 gen() 17859 MB/s [ 23.896648] raid6: sse2x2 xor() 10714 MB/s [ 23.964649] raid6: sse2x1 gen() 15028 MB/s [ 24.032651] raid6: sse2x1 xor() 7333 MB/s [ 24.032651] raid6: using algorithm avx2x2 gen() 42523 MB/s [ 24.032651] raid6: .... xor() 25281 MB/s, rmw enabled [ 24.032652] raid6: using avx2x2 recovery algorithm [ 24.033332] xor: automatically using best checksumming function avx [ 24.046353] Btrfs loaded, crc32c=crc32c-intel [ 24.090755] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 24.261864] systemd[1]: Inserted module 'autofs4' [ 24.331348] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 24.348794] systemd[1]: Detected architecture x86-64. [ 24.365074] systemd[1]: Set hostname to . [ 24.458140] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 24.512958] systemd[1]: Created slice Virtual Machine and Container Slice. [ 24.513312] systemd[1]: Created slice system-modprobe.slice. [ 24.513487] systemd[1]: Created slice Cryptsetup Units Slice. [ 24.513719] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 24.513886] systemd[1]: Created slice User and Session Slice. [ 24.513929] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 24.514044] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 24.514080] systemd[1]: Reached target User and Group Name Lookups. [ 24.514089] systemd[1]: Reached target Slices. [ 24.514099] systemd[1]: Reached target Swap. [ 24.514110] systemd[1]: Reached target Libvirt guests shutdown. [ 24.514153] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 24.514208] systemd[1]: Listening on LVM2 poll daemon socket. [ 24.515005] systemd[1]: Listening on Syslog Socket. [ 24.516093] systemd[1]: Listening on Process Core Dump Socket. [ 24.516140] systemd[1]: Listening on fsck to fsckd communication Socket. [ 24.516180] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 24.516291] systemd[1]: Listening on Journal Audit Socket. [ 24.516338] systemd[1]: Listening on Journal Socket (/dev/log). [ 24.516397] systemd[1]: Listening on Journal Socket. [ 24.516454] systemd[1]: Listening on udev Control Socket. [ 24.516496] systemd[1]: Listening on udev Kernel Socket. [ 24.517162] systemd[1]: Mounting Huge Pages File System... [ 24.517823] systemd[1]: Mounting POSIX Message Queue File System... [ 24.518550] systemd[1]: Mounting Kernel Debug File System... [ 24.519216] systemd[1]: Mounting Kernel Trace File System... [ 24.520496] systemd[1]: Starting Journal Service... [ 24.521130] systemd[1]: Starting Availability of block devices... [ 24.521932] systemd[1]: Starting Set the console keyboard layout... [ 24.522639] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 24.523301] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 24.523333] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 24.523995] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 24.524022] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 24.525475] systemd[1]: Starting Load Kernel Modules... [ 24.526926] systemd[1]: Starting Remount Root and Kernel File Systems... [ 24.527592] systemd[1]: Starting udev Coldplug all Devices... [ 24.528222] systemd[1]: Starting Uncomplicated firewall... [ 24.529367] systemd[1]: Mounted Huge Pages File System. [ 24.529474] systemd[1]: Mounted POSIX Message Queue File System. [ 24.529563] systemd[1]: Mounted Kernel Debug File System. [ 24.529649] systemd[1]: Mounted Kernel Trace File System. [ 24.530925] systemd[1]: Finished Availability of block devices. [ 24.531370] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 24.536113] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro [ 24.537325] systemd[1]: Finished Remount Root and Kernel File Systems. [ 24.538534] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 24.539253] systemd[1]: Starting Create System Users... [ 24.545334] lp: driver loaded but no devices found [ 24.548432] ppdev: user-space parallel port driver [ 24.552501] systemd[1]: Finished Load Kernel Modules. [ 24.553311] systemd[1]: Mounting FUSE Control File System... [ 24.553980] systemd[1]: Mounting Kernel Configuration File System... [ 24.554758] systemd[1]: Starting Apply Kernel Variables... [ 24.555728] Started bpfilter [ 24.556142] bpfilter: Loaded bpfilter_umh pid 417 [ 24.556512] systemd[1]: Mounted Kernel Configuration File System. [ 24.558825] systemd[1]: Mounted FUSE Control File System. [ 24.569032] systemd[1]: Finished Create System Users. [ 24.569791] systemd[1]: Starting Create Static Device Nodes in /dev... [ 24.576495] systemd[1]: Finished Apply Kernel Variables. [ 24.587204] systemd[1]: Finished Create Static Device Nodes in /dev. [ 24.588011] systemd[1]: Starting udev Kernel Device Manager... [ 24.593779] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 24.628215] systemd[1]: Finished udev Coldplug all Devices. [ 24.629671] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 24.633416] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 24.635232] systemd[1]: Started Journal Service. [ 24.795089] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 24.841395] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only [ 24.841599] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only [ 24.842931] pstore: Using crash dump compression: deflate [ 24.842941] pstore: Registered efi as persistent store backend [ 24.872653] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 24.872654] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 24.872655] RAPL PMU: hw unit of domain package 2^-14 Joules [ 24.872655] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 24.872655] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 24.872664] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 24.880812] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 24.981882] mc: Linux media interface: v0.10 [ 25.023204] intel_rapl_common: Found RAPL domain package [ 25.023205] intel_rapl_common: Found RAPL domain core [ 25.023205] intel_rapl_common: Found RAPL domain uncore [ 25.023206] intel_rapl_common: Found RAPL domain dram [ 25.023873] ath9k 0000:09:00.0: enabling device (0000 -> 0002) [ 25.033487] ath: EEPROM regdomain: 0x21 [ 25.033487] ath: EEPROM indicates we should expect a direct regpair map [ 25.033488] ath: Country alpha2 being used: BB [ 25.033488] ath: Regpair used: 0x21 [ 25.033931] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 25.034247] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffaa56c07e0000, irq=19 [ 25.050624] ath9k 0000:09:00.0 wlp9s0: renamed from wlan0 [ 25.067620] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 25.079623] systemd-journald[388]: Received client request to flush runtime journal. [ 25.135226] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 25.135433] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 25.141679] usbcore: registered new interface driver snd-usb-audio [ 25.170616] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 25.171140] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 25.171141] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.171142] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 25.171143] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 25.171143] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 25.171144] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 25.171145] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 25.171146] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 25.171146] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 25.203918] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 25.203951] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 25.203977] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 25.204004] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 25.204029] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 25.204054] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 25.204082] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 25.204109] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 25.204145] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 25.204174] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 25.204207] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 25.204236] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 25.204266] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 28.585892] BTRFS: device label data_evo devid 1 transid 68209 /dev/dm-3 scanned by systemd-udevd (502) [ 28.610220] BTRFS info (device dm-3): disk space caching is enabled [ 28.610221] BTRFS info (device dm-3): has skinny extents [ 28.666517] BTRFS info (device dm-3): enabling ssd optimizations [ 28.702794] audit: type=1400 audit(1599308589.771:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=797 comm="apparmor_parser" [ 28.702899] audit: type=1400 audit(1599308589.771:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=793 comm="apparmor_parser" [ 28.702900] audit: type=1400 audit(1599308589.771:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=793 comm="apparmor_parser" [ 28.702902] audit: type=1400 audit(1599308589.771:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=793 comm="apparmor_parser" [ 28.708738] audit: type=1400 audit(1599308589.779:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=796 comm="apparmor_parser" [ 28.714085] audit: type=1400 audit(1599308589.783:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=794 comm="apparmor_parser" [ 28.714087] audit: type=1400 audit(1599308589.783:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=794 comm="apparmor_parser" [ 28.714603] audit: type=1400 audit(1599308589.783:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=806 comm="apparmor_parser" [ 28.717217] audit: type=1400 audit(1599308589.787:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=801 comm="apparmor_parser" [ 28.717815] audit: type=1400 audit(1599308589.787:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=807 comm="apparmor_parser" [ 34.466005] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 34.466087] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 34.503772] FS-Cache: Loaded [ 34.520609] FS-Cache: Netfs 'cifs' registered for caching [ 34.523413] Key type cifs.spnego registered [ 34.523420] Key type cifs.idmap registered [ 34.523597] CIFS: Attempting to mount //192.168.1.101/share [ 34.523618] CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount. [ 34.665839] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 34.667599] virbr0: port 1(virbr0-nic) entered blocking state [ 34.667599] virbr0: port 1(virbr0-nic) entered disabled state [ 34.667660] device virbr0-nic entered promiscuous mode [ 34.790055] virbr0: port 1(virbr0-nic) entered blocking state [ 34.790056] virbr0: port 1(virbr0-nic) entered listening state [ 34.816829] virbr0: port 1(virbr0-nic) entered disabled state [ 59.900663] ata3: SATA link down (SStatus 0 SControl 300) [ 64.111470] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 64.112732] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 64.112737] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 64.114034] ata3.00: configured for UDMA/133 [ 64.114233] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 64.114691] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 64.114799] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 64.114820] sd 2:0:0:0: [sdb] Write Protect is off [ 64.114825] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 64.114856] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 64.157044] sdb: sdb1 [ 64.157381] sd 2:0:0:0: [sdb] Attached SCSI disk [ 64.477923] ata3.00: exception Emask 0x50 SAct 0x20 SErr 0x40d0802 action 0xe frozen [ 64.477931] ata3.00: irq_stat 0x00400040, connection status changed [ 64.477937] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 64.477942] ata3.00: failed command: READ FPDMA QUEUED [ 64.477953] ata3.00: cmd 60/08:28:00:88:e0/00:00:e8:00:00/40 tag 5 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 64.477957] ata3.00: status: { DRDY } [ 64.477964] ata3: hard resetting link [ 65.998382] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 65.998785] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 65.998790] ata3.00: revalidation failed (errno=-2) [ 71.136345] ata3: hard resetting link [ 71.454547] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 71.454960] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 71.454965] ata3.00: revalidation failed (errno=-2) [ 76.540442] ata3: hard resetting link [ 76.858263] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 76.858563] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 76.858568] ata3.00: revalidation failed (errno=-2) [ 76.858575] ata3.00: disabled [ 81.930314] ata3: hard resetting link [ 82.245239] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 82.245464] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 82.245478] sd 2:0:0:0: [sdb] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=17s [ 82.245479] sd 2:0:0:0: [sdb] tag#5 Sense Key : Illegal Request [current] [ 82.245480] sd 2:0:0:0: [sdb] tag#5 Add. Sense: Unaligned write command [ 82.245482] sd 2:0:0:0: [sdb] tag#5 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 82.245483] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 82.245509] ata3: EH complete [ 82.245513] ata3.00: detaching (SCSI 2:0:0:0) [ 82.245531] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 82.245533] Buffer I/O error on dev sdb, logical block 488378624, async page read [ 82.247179] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 82.247196] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 82.247197] sd 2:0:0:0: [sdb] Stopping disk [ 82.247201] sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 113.307871] ata3: SATA link down (SStatus 0 SControl 300) [ 119.647653] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 119.648751] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 119.648755] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 119.649929] ata3.00: configured for UDMA/133 [ 119.650127] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 119.650676] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 119.650696] sd 2:0:0:0: [sdb] Write Protect is off [ 119.650700] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 119.650729] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 119.650803] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 119.740678] sdb: sdb1 [ 119.741207] sd 2:0:0:0: [sdb] Attached SCSI disk [ 120.051862] ata3.00: exception Emask 0x50 SAct 0x20 SErr 0x40d0802 action 0xe frozen [ 120.051869] ata3.00: irq_stat 0x00400040, connection status changed [ 120.051874] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 120.051880] ata3.00: failed command: READ FPDMA QUEUED [ 120.051891] ata3.00: cmd 60/08:28:00:88:e0/00:00:e8:00:00/40 tag 5 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 120.051895] ata3.00: status: { DRDY } [ 120.051902] ata3: hard resetting link [ 121.607782] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 121.608196] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 121.608200] ata3.00: revalidation failed (errno=-2) [ 126.739815] ata3: hard resetting link [ 127.056509] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 127.056931] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 127.056936] ata3.00: revalidation failed (errno=-2) [ 132.119656] ata3: hard resetting link [ 132.436637] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 132.437049] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 132.437054] ata3.00: revalidation failed (errno=-2) [ 132.437060] ata3.00: disabled [ 137.491771] ata3: hard resetting link [ 137.803908] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 137.804317] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 137.804353] sd 2:0:0:0: [sdb] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=18s [ 137.804360] sd 2:0:0:0: [sdb] tag#5 Sense Key : Illegal Request [current] [ 137.804364] sd 2:0:0:0: [sdb] tag#5 Add. Sense: Unaligned write command [ 137.804369] sd 2:0:0:0: [sdb] tag#5 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 137.804375] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 137.804411] ata3: EH complete [ 137.804425] ata3.00: detaching (SCSI 2:0:0:0) [ 137.804503] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 137.804512] Buffer I/O error on dev sdb, logical block 488378624, async page read [ 137.809142] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 137.809206] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 137.809210] sd 2:0:0:0: [sdb] Stopping disk [ 137.809224] sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 154.063700] ata3: SATA link down (SStatus 0 SControl 300) [ 159.759484] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 159.760844] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 159.760849] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 159.762299] ata3.00: configured for UDMA/133 [ 159.762498] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 159.762997] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 159.763068] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 159.763090] sd 2:0:0:0: [sdb] Write Protect is off [ 159.763094] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 159.763125] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 159.793876] sdb: sdb1 [ 159.794246] sd 2:0:0:0: [sdb] Attached SCSI disk [ 160.103356] ata3.00: exception Emask 0x50 SAct 0x100000 SErr 0x40d0802 action 0xe frozen [ 160.103364] ata3.00: irq_stat 0x00400040, connection status changed [ 160.103370] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 160.103376] ata3.00: failed command: READ FPDMA QUEUED [ 160.103387] ata3.00: cmd 60/08:a0:00:88:e0/00:00:e8:00:00/40 tag 20 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 160.103391] ata3.00: status: { DRDY } [ 160.103398] ata3: hard resetting link [ 161.535329] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 161.535806] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 161.535810] ata3.00: revalidation failed (errno=-2) [ 162.091556] ata3: hard resetting link [ 162.403890] ata3: SATA link down (SStatus 0 SControl 300) [ 165.093975] ata3: hard resetting link [ 169.966907] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 169.969609] ata3.00: configured for UDMA/133 [ 169.969633] sd 2:0:0:0: [sdb] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=10s [ 169.969638] sd 2:0:0:0: [sdb] tag#20 Sense Key : Illegal Request [current] [ 169.969643] sd 2:0:0:0: [sdb] tag#20 Add. Sense: Unaligned write command [ 169.969648] sd 2:0:0:0: [sdb] tag#20 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 169.969654] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 169.969686] ata3: EH complete [ 170.278881] ata3.00: exception Emask 0x50 SAct 0x4 SErr 0x40d0802 action 0xe frozen [ 170.278888] ata3.00: irq_stat 0x00400040, connection status changed [ 170.278894] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 170.278899] ata3.00: failed command: READ FPDMA QUEUED [ 170.278910] ata3.00: cmd 60/08:10:00:88:e0/00:00:e8:00:00/40 tag 2 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 170.278914] ata3.00: status: { DRDY } [ 170.278921] ata3: hard resetting link [ 171.830814] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 171.831228] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 171.831233] ata3.00: revalidation failed (errno=-2) [ 176.914599] ata3: hard resetting link [ 177.226447] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 177.226856] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 177.226860] ata3.00: revalidation failed (errno=-2) [ 182.290394] ata3: hard resetting link [ 182.606393] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 182.606881] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 182.606886] ata3.00: revalidation failed (errno=-2) [ 182.606893] ata3.00: disabled [ 187.666080] ata3: hard resetting link [ 187.978623] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 187.979108] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 187.979145] sd 2:0:0:0: [sdb] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=18s [ 187.979151] sd 2:0:0:0: [sdb] tag#2 Sense Key : Illegal Request [current] [ 187.979156] sd 2:0:0:0: [sdb] tag#2 Add. Sense: Unaligned write command [ 187.979161] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 187.979167] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 187.979176] Buffer I/O error on dev sdb, logical block 488378624, async page read [ 187.979215] ata3: EH complete [ 187.979224] sd 2:0:0:0: rejecting I/O to offline device [ 187.979258] ata3.00: detaching (SCSI 2:0:0:0) [ 187.981007] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 187.981073] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 187.981076] sd 2:0:0:0: [sdb] Stopping disk [ 187.981091] sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 203.153855] ata3: SATA link down (SStatus 0 SControl 300) [ 207.825706] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 207.826965] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 207.826970] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 207.828344] ata3.00: configured for UDMA/133 [ 207.828535] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 207.828972] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 207.829148] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 207.829168] sd 2:0:0:0: [sdb] Write Protect is off [ 207.829172] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 207.829201] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 207.868352] sdb: sdb1 [ 207.868723] sd 2:0:0:0: [sdb] Attached SCSI disk [ 208.177577] ata3.00: exception Emask 0x50 SAct 0x4 SErr 0x40d0802 action 0xe frozen [ 208.177584] ata3.00: irq_stat 0x00400040, connection status changed [ 208.177590] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 208.177596] ata3.00: failed command: READ FPDMA QUEUED [ 208.177607] ata3.00: cmd 60/08:10:00:88:e0/00:00:e8:00:00/40 tag 2 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 208.177611] ata3.00: status: { DRDY } [ 208.177618] ata3: hard resetting link [ 209.969499] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 209.970010] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 209.970014] ata3.00: revalidation failed (errno=-2) [ 215.057596] ata3: hard resetting link [ 215.369812] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 215.370413] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 215.370418] ata3.00: revalidation failed (errno=-2) [ 220.433430] ata3: hard resetting link [ 220.750484] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 220.751000] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 220.751004] ata3.00: revalidation failed (errno=-2) [ 220.751011] ata3.00: disabled [ 225.809207] ata3: hard resetting link [ 226.121531] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 226.122045] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 226.122083] sd 2:0:0:0: [sdb] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=18s [ 226.122089] sd 2:0:0:0: [sdb] tag#2 Sense Key : Illegal Request [current] [ 226.122094] sd 2:0:0:0: [sdb] tag#2 Add. Sense: Unaligned write command [ 226.122099] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 226.122105] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 226.122144] ata3: EH complete [ 226.122169] ata3.00: detaching (SCSI 2:0:0:0) [ 226.122246] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 226.122255] Buffer I/O error on dev sdb, logical block 488378624, async page read [ 226.125050] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 226.126089] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 226.126094] sd 2:0:0:0: [sdb] Stopping disk [ 226.126110] sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 269.576793] ata3: SATA link down (SStatus 0 SControl 300) [ 276.188719] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 276.190280] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 276.190285] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 276.191932] ata3.00: configured for UDMA/133 [ 276.192123] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 276.192745] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 276.192816] sd 2:0:0:0: [sdb] Write Protect is off [ 276.192822] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 276.192887] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 276.195951] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 276.341457] sdb: sdb1 [ 276.342017] sd 2:0:0:0: [sdb] Attached SCSI disk [ 276.656715] ata3.00: exception Emask 0x50 SAct 0x1 SErr 0x40d0802 action 0xe frozen [ 276.656722] ata3.00: irq_stat 0x00400040, connection status changed [ 276.656728] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 276.656733] ata3.00: failed command: READ FPDMA QUEUED [ 276.656744] ata3.00: cmd 60/08:00:00:88:e0/00:00:e8:00:00/40 tag 0 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 276.656748] ata3.00: status: { DRDY } [ 276.656755] ata3: hard resetting link [ 278.152727] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 278.153231] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 278.153236] ata3.00: revalidation failed (errno=-2) [ 283.408642] ata3: hard resetting link [ 283.720960] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 283.721355] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 283.721360] ata3.00: revalidation failed (errno=-2) [ 288.784452] ata3: hard resetting link [ 289.096530] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 289.097031] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 289.097035] ata3.00: revalidation failed (errno=-2) [ 289.097042] ata3.00: disabled [ 294.160225] ata3: hard resetting link [ 294.472212] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 294.472708] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 294.472746] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=18s [ 294.472752] sd 2:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [ 294.472756] sd 2:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command [ 294.472761] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 294.472767] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 294.472805] ata3: EH complete [ 294.472833] ata3.00: detaching (SCSI 2:0:0:0) [ 294.472905] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 294.472915] Buffer I/O error on dev sdb, logical block 488378624, async page read [ 294.475891] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 294.475954] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 294.475958] sd 2:0:0:0: [sdb] Stopping disk [ 294.476015] sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 1574.393338] BTRFS info (device dm-3): device fsid 3741cfd5-0845-44a4-9f77-edf649002d94 devid 1 moved old:/dev/mapper/data_evo new:/dev/dm-3 [ 1574.408162] BTRFS info (device dm-3): device fsid 3741cfd5-0845-44a4-9f77-edf649002d94 devid 1 moved old:/dev/dm-3 new:/dev/mapper/data_evo [ 1574.456124] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1574.481291] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 1592.939478] ata3: SATA link down (SStatus 0 SControl 300) [ 1598.819349] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1598.820633] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 1598.820638] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 1598.822099] ata3.00: configured for UDMA/133 [ 1598.822344] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 1598.822799] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1598.822976] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1598.823000] sd 2:0:0:0: [sdb] Write Protect is off [ 1598.823004] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1598.823035] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1598.869437] sdb: sdb1 [ 1598.869701] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1599.179385] ata3.00: exception Emask 0x50 SAct 0x8 SErr 0x40d0802 action 0xe frozen [ 1599.179392] ata3.00: irq_stat 0x00400040, connection status changed [ 1599.179398] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 1599.179403] ata3.00: failed command: READ FPDMA QUEUED [ 1599.179414] ata3.00: cmd 60/08:18:00:88:e0/00:00:e8:00:00/40 tag 3 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 1599.179418] ata3.00: status: { DRDY } [ 1599.179425] ata3: hard resetting link [ 1600.791244] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1600.791619] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 1600.791624] ata3.00: revalidation failed (errno=-2) [ 1604.033306] ata3: hard resetting link [ 1604.343199] ata3: SATA link down (SStatus 0 SControl 300) [ 1605.162193] ata3: hard resetting link [ 1609.267114] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1609.269750] ata3.00: configured for UDMA/133 [ 1609.269772] sd 2:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=10s [ 1609.269778] sd 2:0:0:0: [sdb] tag#3 Sense Key : Illegal Request [current] [ 1609.269783] sd 2:0:0:0: [sdb] tag#3 Add. Sense: Unaligned write command [ 1609.269787] sd 2:0:0:0: [sdb] tag#3 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 1609.269794] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 1609.269825] ata3: EH complete [ 1609.570987] ata3.00: exception Emask 0x50 SAct 0x100 SErr 0x40d0802 action 0xe frozen [ 1609.570995] ata3.00: irq_stat 0x00400040, connection status changed [ 1609.571001] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 1609.571007] ata3.00: failed command: READ FPDMA QUEUED [ 1609.571018] ata3.00: cmd 60/08:40:00:88:e0/00:00:e8:00:00/40 tag 8 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 1609.571022] ata3.00: status: { DRDY } [ 1609.571029] ata3: hard resetting link [ 1611.250963] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1611.251289] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 1611.251294] ata3.00: revalidation failed (errno=-2) [ 1616.366984] ata3: hard resetting link [ 1616.683613] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1616.683912] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 1616.683918] ata3.00: revalidation failed (errno=-2) [ 1617.171916] BTRFS info (device dm-3): device fsid 3741cfd5-0845-44a4-9f77-edf649002d94 devid 1 moved old:/dev/mapper/data_evo new:/dev/dm-3 [ 1617.177306] BTRFS info (device dm-3): device fsid 3741cfd5-0845-44a4-9f77-edf649002d94 devid 1 moved old:/dev/dm-3 new:/dev/mapper/data_evo [ 1621.742884] ata3: hard resetting link [ 1622.055159] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1622.055556] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 1622.055560] ata3.00: revalidation failed (errno=-2) [ 1622.055567] ata3.00: disabled [ 1627.118783] ata3: hard resetting link [ 1627.430811] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1627.431287] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 1627.431325] sd 2:0:0:0: [sdb] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=18s [ 1627.431331] sd 2:0:0:0: [sdb] tag#8 Sense Key : Illegal Request [current] [ 1627.431336] sd 2:0:0:0: [sdb] tag#8 Add. Sense: Unaligned write command [ 1627.431341] sd 2:0:0:0: [sdb] tag#8 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 1627.431348] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 1627.431369] Buffer I/O error on dev sdb, logical block 488378624, async page read [ 1627.431403] ata3: EH complete [ 1627.431418] ata3.00: detaching (SCSI 2:0:0:0) [ 1627.433595] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 1627.433661] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 1627.433664] sd 2:0:0:0: [sdb] Stopping disk [ 1627.433678] sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 1802.327292] ata3: SATA link down (SStatus 0 SControl 300) [ 2211.401635] PM: suspend entry (deep) [ 2211.408312] Filesystems sync: 0.006 seconds [ 2211.409877] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 2211.411811] OOM killer disabled. [ 2211.411811] Freezing remaining freezable tasks ... (elapsed 1.523 seconds) done. [ 2212.935302] printk: Suspending console(s) (use no_console_suspend to debug) [ 2212.937806] serial 00:01: disabled [ 2212.937969] e1000e: EEE TX LPI TIMER: 00000011 [ 2212.949265] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2212.950800] sd 0:0:0:0: [sda] Stopping disk [ 2215.497856] ACPI: Preparing to enter system sleep state S3 [ 2215.500636] PM: Saving platform NVS memory [ 2215.500691] Disabling non-boot CPUs ... [ 2215.501388] IRQ 19: no longer affine to CPU1 [ 2215.501398] IRQ 132: no longer affine to CPU1 [ 2215.502432] smpboot: CPU 1 is now offline [ 2215.507763] IRQ 134: no longer affine to CPU2 [ 2215.508804] smpboot: CPU 2 is now offline [ 2215.513687] IRQ 16: no longer affine to CPU3 [ 2215.514691] smpboot: CPU 3 is now offline [ 2215.518387] ACPI: Low-level resume complete [ 2215.518451] PM: Restoring platform NVS memory [ 2215.521276] smpboot: Scheduler frequency invariance went wobbly, disabling! [ 2215.521310] Enabling non-boot CPUs ... [ 2215.521340] x86: Booting SMP configuration: [ 2215.521340] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 2215.523008] CPU1 is up [ 2215.523026] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 2215.524702] CPU2 is up [ 2215.524720] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 2215.526413] CPU3 is up [ 2215.527337] ACPI: Waking up from system sleep state S3 [ 2215.580040] sd 0:0:0:0: [sda] Starting disk [ 2215.583186] serial 00:01: activated [ 2215.947310] ata6: SATA link down (SStatus 0 SControl 300) [ 2215.947341] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2215.947368] ata4: SATA link down (SStatus 0 SControl 300) [ 2215.947395] ata2: SATA link down (SStatus 0 SControl 300) [ 2215.947419] ata5: SATA link down (SStatus 0 SControl 300) [ 2215.947440] ata3: SATA link down (SStatus 0 SControl 300) [ 2215.947704] ata1.00: supports DRM functions and may not be fully accessible [ 2215.950301] ata1.00: disabling queued TRIM support [ 2215.952141] ata1.00: supports DRM functions and may not be fully accessible [ 2215.953015] ata1.00: disabling queued TRIM support [ 2215.954072] ata1.00: configured for UDMA/133 [ 2216.002603] acpi LNXPOWER:16: Turning OFF [ 2216.002872] acpi LNXPOWER:15: Turning OFF [ 2216.003134] acpi LNXPOWER:14: Turning OFF [ 2216.003432] acpi LNXPOWER:13: Turning OFF [ 2216.003691] acpi LNXPOWER:12: Turning OFF [ 2216.003949] acpi LNXPOWER:11: Turning OFF [ 2216.004207] acpi LNXPOWER:10: Turning OFF [ 2216.004468] acpi LNXPOWER:0f: Turning OFF [ 2216.004727] acpi LNXPOWER:0e: Turning OFF [ 2216.004987] acpi LNXPOWER:0d: Turning OFF [ 2216.005247] acpi LNXPOWER:0c: Turning OFF [ 2216.005506] acpi LNXPOWER:0b: Turning OFF [ 2216.005765] acpi LNXPOWER:0a: Turning OFF [ 2216.006024] acpi LNXPOWER:09: Turning OFF [ 2216.006283] acpi LNXPOWER:08: Turning OFF [ 2216.006389] acpi LNXPOWER:07: Turning OFF [ 2216.006443] acpi LNXPOWER:06: Turning OFF [ 2216.006497] acpi LNXPOWER:05: Turning OFF [ 2216.006551] acpi LNXPOWER:04: Turning OFF [ 2216.006605] acpi LNXPOWER:03: Turning OFF [ 2216.006660] OOM killer enabled. [ 2216.006661] Restarting tasks ... [ 2216.009078] pci_bus 0000:03: Allocating resources [ 2216.009082] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 2216.009083] pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 2216.009085] pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 2216.009087] pci 0000:02:00.0: BAR 14: no space for [mem size 0x00200000] [ 2216.009088] pci 0000:02:00.0: BAR 14: failed to assign [mem size 0x00200000] [ 2216.009089] pci 0000:02:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 2216.009090] pci 0000:02:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 2216.009091] pci 0000:02:00.0: BAR 13: no space for [io size 0x1000] [ 2216.009092] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x1000] [ 2216.009093] pci 0000:02:00.0: BAR 14: no space for [mem size 0x00200000] [ 2216.009094] pci 0000:02:00.0: BAR 14: failed to assign [mem size 0x00200000] [ 2216.009095] pci 0000:02:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 2216.009096] pci 0000:02:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 2216.009097] pci 0000:02:00.0: BAR 13: no space for [io size 0x1000] [ 2216.009098] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x1000] [ 2216.009099] pci 0000:02:00.0: PCI bridge to [bus 03] [ 2216.012710] done. [ 2216.012917] video LNXVIDEO:00: Restoring backlight state [ 2216.012923] PM: suspend exit [ 2216.182429] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 2221.132756] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 2221.132833] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 3118.832801] PM: suspend entry (deep) [ 3118.842353] Filesystems sync: 0.009 seconds [ 3118.842690] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 3118.844805] OOM killer disabled. [ 3118.844805] Freezing remaining freezable tasks ... (elapsed 2.445 seconds) done. [ 3121.289997] printk: Suspending console(s) (use no_console_suspend to debug) [ 3121.292807] serial 00:01: disabled [ 3121.292936] e1000e: EEE TX LPI TIMER: 00000011 [ 3121.325886] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3121.327381] sd 0:0:0:0: [sda] Stopping disk [ 3123.987645] ACPI: Preparing to enter system sleep state S3 [ 3123.990422] PM: Saving platform NVS memory [ 3123.990477] Disabling non-boot CPUs ... [ 3123.991164] IRQ 16: no longer affine to CPU1 [ 3123.991171] IRQ 19: no longer affine to CPU1 [ 3123.992209] smpboot: CPU 1 is now offline [ 3123.996109] IRQ 134: no longer affine to CPU2 [ 3123.997136] smpboot: CPU 2 is now offline [ 3124.000812] IRQ 132: no longer affine to CPU3 [ 3124.001854] smpboot: CPU 3 is now offline [ 3124.006727] ACPI: Low-level resume complete [ 3124.006791] PM: Restoring platform NVS memory [ 3124.009643] Enabling non-boot CPUs ... [ 3124.009673] x86: Booting SMP configuration: [ 3124.009674] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3124.011340] CPU1 is up [ 3124.011359] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 3124.013045] CPU2 is up [ 3124.013063] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 3124.014755] CPU3 is up [ 3124.015628] ACPI: Waking up from system sleep state S3 [ 3124.061525] sd 0:0:0:0: [sda] Starting disk [ 3124.063445] serial 00:01: activated [ 3124.438028] ata3: SATA link down (SStatus 0 SControl 300) [ 3124.438059] ata4: SATA link down (SStatus 0 SControl 300) [ 3124.438085] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3124.438112] ata5: SATA link down (SStatus 0 SControl 300) [ 3124.438135] ata2: SATA link down (SStatus 0 SControl 300) [ 3124.438156] ata6: SATA link down (SStatus 0 SControl 300) [ 3124.438373] ata1.00: supports DRM functions and may not be fully accessible [ 3124.440937] ata1.00: disabling queued TRIM support [ 3124.442312] ata1.00: supports DRM functions and may not be fully accessible [ 3124.443059] ata1.00: disabling queued TRIM support [ 3124.444092] ata1.00: configured for UDMA/133 [ 3124.480628] acpi LNXPOWER:16: Turning OFF [ 3124.480988] acpi LNXPOWER:15: Turning OFF [ 3124.481290] acpi LNXPOWER:14: Turning OFF [ 3124.481552] acpi LNXPOWER:13: Turning OFF [ 3124.481810] acpi LNXPOWER:12: Turning OFF [ 3124.482070] acpi LNXPOWER:11: Turning OFF [ 3124.482328] acpi LNXPOWER:10: Turning OFF [ 3124.482587] acpi LNXPOWER:0f: Turning OFF [ 3124.482846] acpi LNXPOWER:0e: Turning OFF [ 3124.483104] acpi LNXPOWER:0d: Turning OFF [ 3124.483362] acpi LNXPOWER:0c: Turning OFF [ 3124.483620] acpi LNXPOWER:0b: Turning OFF [ 3124.483878] acpi LNXPOWER:0a: Turning OFF [ 3124.484138] acpi LNXPOWER:09: Turning OFF [ 3124.484395] acpi LNXPOWER:08: Turning OFF [ 3124.484630] acpi LNXPOWER:07: Turning OFF [ 3124.484684] acpi LNXPOWER:06: Turning OFF [ 3124.484737] acpi LNXPOWER:05: Turning OFF [ 3124.484791] acpi LNXPOWER:04: Turning OFF [ 3124.484845] acpi LNXPOWER:03: Turning OFF [ 3124.484899] OOM killer enabled. [ 3124.484900] Restarting tasks ... done. [ 3124.498193] video LNXVIDEO:00: Restoring backlight state [ 3124.498198] PM: suspend exit [ 3124.549268] pci_bus 0000:03: Allocating resources [ 3124.549272] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 3124.549274] pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 3124.549275] pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 3124.549277] pci 0000:02:00.0: BAR 14: no space for [mem size 0x00200000] [ 3124.549278] pci 0000:02:00.0: BAR 14: failed to assign [mem size 0x00200000] [ 3124.549279] pci 0000:02:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 3124.549279] pci 0000:02:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 3124.549280] pci 0000:02:00.0: BAR 13: no space for [io size 0x1000] [ 3124.549281] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x1000] [ 3124.549282] pci 0000:02:00.0: BAR 14: no space for [mem size 0x00200000] [ 3124.549283] pci 0000:02:00.0: BAR 14: failed to assign [mem size 0x00200000] [ 3124.549283] pci 0000:02:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 3124.549284] pci 0000:02:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 3124.549285] pci 0000:02:00.0: BAR 13: no space for [io size 0x1000] [ 3124.549285] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x1000] [ 3124.549286] pci 0000:02:00.0: PCI bridge to [bus 03] [ 3124.688137] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 3130.241503] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 3130.241580] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 3310.928875] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3310.930154] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 3310.930159] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3310.931404] ata3.00: configured for UDMA/133 [ 3310.931604] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 3310.932210] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3310.932230] sd 2:0:0:0: [sdb] Write Protect is off [ 3310.932234] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3310.932263] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3310.932310] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3310.968348] sdb: sdb1 [ 3310.968697] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3311.284854] ata3.00: exception Emask 0x50 SAct 0x20 SErr 0x40d0802 action 0xe frozen [ 3311.284862] ata3.00: irq_stat 0x00400040, connection status changed [ 3311.284867] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 3311.284873] ata3.00: failed command: READ FPDMA QUEUED [ 3311.284884] ata3.00: cmd 60/08:28:00:88:e0/00:00:e8:00:00/40 tag 5 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 3311.284888] ata3.00: status: { DRDY } [ 3311.284895] ata3: hard resetting link [ 3312.960576] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3312.961061] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3312.961066] ata3.00: revalidation failed (errno=-2) [ 3318.036340] ata3: hard resetting link [ 3318.352142] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3318.352621] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3318.352625] ata3.00: revalidation failed (errno=-2) [ 3323.411936] ata3: hard resetting link [ 3323.728123] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3323.728594] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3323.728598] ata3.00: revalidation failed (errno=-2) [ 3323.728605] ata3.00: disabled [ 3328.787539] ata3: hard resetting link [ 3329.103710] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3329.104198] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3329.104237] sd 2:0:0:0: [sdb] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=18s [ 3329.104243] sd 2:0:0:0: [sdb] tag#5 Sense Key : Illegal Request [current] [ 3329.104248] sd 2:0:0:0: [sdb] tag#5 Add. Sense: Unaligned write command [ 3329.104253] sd 2:0:0:0: [sdb] tag#5 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 3329.104259] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 3329.104298] ata3: EH complete [ 3329.104314] ata3.00: detaching (SCSI 2:0:0:0) [ 3329.104389] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 3329.104399] Buffer I/O error on dev sdb, logical block 488378624, async page read [ 3329.106583] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 3329.106653] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3329.106656] sd 2:0:0:0: [sdb] Stopping disk [ 3329.106671] sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3434.095345] ata3: SATA link down (SStatus 0 SControl 300) [ 3437.551273] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3437.552537] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 3437.552542] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3437.553855] ata3.00: configured for UDMA/133 [ 3437.554057] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 3437.554615] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3437.554643] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3437.554685] sd 2:0:0:0: [sdb] Write Protect is off [ 3437.554690] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3437.554725] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3437.592986] sdb: sdb1 [ 3437.593296] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3437.899128] ata3.00: exception Emask 0x50 SAct 0x80000000 SErr 0x40d0802 action 0xe frozen [ 3437.899136] ata3.00: irq_stat 0x00400040, connection status changed [ 3437.899142] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 3437.899148] ata3.00: failed command: READ FPDMA QUEUED [ 3437.899159] ata3.00: cmd 60/08:f8:00:88:e0/00:00:e8:00:00/40 tag 31 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 3437.899163] ata3.00: status: { DRDY } [ 3437.899172] ata3: hard resetting link [ 3439.391246] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3439.391540] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3439.391544] ata3.00: revalidation failed (errno=-2) [ 3444.495063] ata3: hard resetting link [ 3444.811873] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3444.812278] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3444.812282] ata3.00: revalidation failed (errno=-2) [ 3449.870937] ata3: hard resetting link [ 3450.186835] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3450.187298] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3450.187303] ata3.00: revalidation failed (errno=-2) [ 3450.187310] ata3.00: disabled [ 3455.246712] ata3: hard resetting link [ 3455.563332] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3455.563755] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3455.563793] sd 2:0:0:0: [sdb] tag#31 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=17s [ 3455.563799] sd 2:0:0:0: [sdb] tag#31 Sense Key : Illegal Request [current] [ 3455.563804] sd 2:0:0:0: [sdb] tag#31 Add. Sense: Unaligned write command [ 3455.563809] sd 2:0:0:0: [sdb] tag#31 CDB: Read(10) 28 00 e8 e0 88 00 00 00 08 00 [ 3455.563815] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 3455.563853] ata3: EH complete [ 3455.563877] ata3.00: detaching (SCSI 2:0:0:0) [ 3455.563956] blk_update_request: I/O error, dev sdb, sector 3907028992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 3455.563965] Buffer I/O error on dev sdb, logical block 488378624, async page read [ 3455.566818] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 3455.567173] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3455.567177] sd 2:0:0:0: [sdb] Stopping disk [ 3455.567193] sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3529.658582] ata3: SATA link down (SStatus 0 SControl 300) [ 3586.930249] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3586.931361] ata3.00: ATA-8: WEOYC-2T 84, ES2OA60W, max UDMA/133 [ 3586.931366] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3586.932496] ata3.00: configured for UDMA/133 [ 3586.932705] scsi 2:0:0:0: Direct-Access ATA WEOYC-2T A60W PQ: 0 ANSI: 5 [ 3586.933271] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3586.933292] sd 2:0:0:0: [sdb] Write Protect is off [ 3586.933296] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3586.933326] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3586.933450] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3586.978889] sdb: sdb1 [ 3586.979207] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3587.294240] ata3.00: exception Emask 0x50 SAct 0x8000 SErr 0x40d0802 action 0xe frozen [ 3587.294247] ata3.00: irq_stat 0x00400040, connection status changed [ 3587.294253] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch } [ 3587.294259] ata3.00: failed command: READ FPDMA QUEUED [ 3587.294270] ata3.00: cmd 60/08:78:00:88:e0/00:00:e8:00:00/40 tag 15 ncq dma 4096 in res 50/00:08:00:88:e0/00:00:e8:00:00/40 Emask 0x50 (ATA bus error) [ 3587.294274] ata3.00: status: { DRDY } [ 3587.294281] ata3: hard resetting link [ 3588.854249] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3588.854639] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3588.854643] ata3.00: revalidation failed (errno=-2) [ 3593.989714] ata3: hard resetting link [ 3594.306278] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3594.306760] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3594.306764] ata3.00: revalidation failed (errno=-2) [ 3599.365462] ata3: hard resetting link [ 3599.681396] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3599.681825] ata3.00: both IDENTIFYs aborted, assuming NODEV [ 3599.681839] ata3.00: revalidation failed (errno=-2) [ 3599.681842] ata3.00: disabled