Adaptec AIC-7892 Ultra 160/m
Technické parametry
jednoduchy bios, bezproblemovy. Dalsi oznaceni
je take 29160N
Identifikace pod Linuxem
Adaptec AIC7xxx driver version: 5.1.31/3.2.4
Compile Options:
TCQ Enabled By Default : Enabled
AIC7XXX_PROC_STATS : Enabled
AIC7XXX_RESET_DELAY : 5
Adapter Configuration:
SCSI Adapter: Adaptec AIC-7892 Ultra 160/m SCSI host adapter
Ultra-160/m LVD/SE Wide Controller at PCI 0/10/0
PCI MMAPed I/O Base: 0xe1800000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 11
SCBs: Active 1, Max Active 1,
Allocated 15, HW 32, Page 255
Interrupts: 4022
BIOS Control Word: 0xb8f4
Adapter Control Word: 0x645d
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
Tagged Queue By Device array for aic7xxx host instance 0:
{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Postup zprovoznění pod Linuxem
zasunout do pocitace. standartni jadro rh6.2 ma podporu
(2.2.14-*). modul aic7xxx.o