ZCOMAX XI-325H PCMCIA

PCMCIA Prism 2.5 karta bez regulace vykonu -- striktne nastavene na 100mW. Driver hostap primo soucasti jadra 2.6.15 a vys.

cs: IO port probe 0x100-0x4ff: excluding 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ieee80211_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.4-kernel (Jouni Malinen <jkmaline@cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0x3100-0x313f
prism2_hw_init: initialized in 194 ms
wifi0: NIC: id=0x800c v1.0.0
wifi0: PRI: id=0x15 v1.1.1
wifi0: STA: id=0x1f v1.8.2
wifi0: registered netdevice wlan0

V jadre podporu pro cardbus balik pcmcia_cs Zkontrolovat, jestli se nebijou IRQ a pripadne flashnout novejsi firmware (muj pripad - puvodni 1.0.7/1.3.6 novy 1.1.1/1.8.2)

Potom to chodi jako vino :) Novy firmware VELMI doporucuju

Flash je mozno provest primo ovladacem hostap