Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

Dobry vecer.. S linuxom prave zacinam a mam vo svojom notebooku kartu Intel PRO/Wireless 2011B LAN PC Card (PCMCIA) a potreboval by som ju nejako nainstalovat. Na nete som nasiel konfiguraciu

http://sentamientos.blogspot.com/2006/04/configuring-intel-prowireless-2011b.html

ale neviem co pohnut od bodu 4 potreboval by som pomoct od skusenych .Mam Mandrivu 2007 .Vsetkym dakujem.

no tak stale nic..to iste

[root@localhost orinoco-0.15rc4]# make make -C /lib/modules/2.6.17-5mdv/build M=/home/lukas/intel/orinoco-0.15rc4 KERNELRELEASE=2.6.11-6mdk modules make: *** /lib/modules/2.6.17-5mdv/build: Adresár alebo súbor neexistuje. Stop. make: *** [modules] Error 2

12.11.2006 16:34 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

takze misto KERNELRELEASE=2.6.11-6mdk napsat KERNELRELEASE=2.6.17-5mdv , take musis nainstalovat zdroje ke tvemu jadru bude to balicek pod nazvem budto kernel-source , linux-source ci tak nejak tak si ho najdi a nainsatluj nebo si ho stahni o d sud ftp://chuck.ucs.indiana.edu/pub/array3/mandrake/official/2007.0/i586/media/main/release/kernel-source-2.6.17.5mdv-1-1mdv2007.0.i586.rpm a nainstaluj. Potom by mel prikaz make fungovat

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

dakujem stiahol som balik a nainstaloval nieco nieje vporiadku...

[root@localhost orinoco-0.15rc4]# make make -C /usr/src/linux-2.6.17-5mdv M=/home/lukas/intel/orinoco-0.15rc4 KERNELREL EASE=2.6.11-6mdk modules make[1]: Entering directory `/usr/src/linux-2.6.17-5mdv'

WARNING: Symbol version dump /usr/src/linux-2.6.17-5mdv/Module.symvers is missing; modules will have no dependencies and modversions.

CC [M] /home/lukas/intel/orinoco-0.15rc4/orinoco_nortel.o CC [M] /home/lukas/intel/orinoco-0.15rc4/orinoco_pci.o CC [M] /home/lukas/intel/orinoco-0.15rc4/orinoco_plx.o CC [M] /home/lukas/intel/orinoco-0.15rc4/orinoco_tmd.o CC [M] /home/lukas/intel/orinoco-0.15rc4/hermes.o CC [M] /home/lukas/intel/orinoco-0.15rc4/orinoco.o CC [M] /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.o /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:63: error: expected specifier-qua lifier-list before ‘dev_link_t’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:77: error: expected ‘=’, ‘,’, ‘;’ , ‘asm’ or ‘__attribute__’ before ‘*’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:83: error: expected ‘)’ before ‘* ’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:84: error: expected ‘)’ before ‘* ’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: In function ‘orinoco_cs_hard_res et’: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: ‘dev_link_t’ undeclare d (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: (Each undeclared ident ifier is reported only once /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: for each function it a ppears in.) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: ‘link’ undeclared (fir st use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: ‘struct orinoco_pccard ’ has no member named ‘link’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:97: warning: ISO C90 forbids mixe d declarations and code /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:100: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:107: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: At top level: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:124: error: expected ‘=’, ‘,’, ‘; ’, ‘asm’ or ‘__attribute__’ before ‘*’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:191: error: expected ‘)’ before ‘ *’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:232: error: expected ‘)’ before ‘ *’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:446: error: expected ‘)’ before ‘ *’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: In function ‘orinoco_cs_event’: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:477: error: ‘dev_link_t’ undeclar ed (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:477: error: ‘link’ undeclared (fi rst use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:478: warning: ISO C90 forbids mix ed declarations and code /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:486: error: ‘DEV_PRESENT’ undecla red (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:487: error: ‘DEV_CONFIG’ undeclar ed (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:498: error: ‘DEV_CONFIG_PENDING’ undeclared (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:499: warning: implicit declaratio n of function ‘orinoco_cs_config’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:503: error: ‘DEV_SUSPEND’ undecla red (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:511: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:511: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:527: warning: implicit declaratio n of function ‘pcmcia_release_configuration’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:540: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:540: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: At top level: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:671: error: unknown field ‘attach ’ specified in initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:671: error: ‘orinoco_cs_attach’ u ndeclared here (not in a function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:671: warning: excess elements in struct initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:671: warning: (near initializatio n for ‘orinoco_driver’) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:672: error: unknown field ‘detach ’ specified in initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:672: error: ‘orinoco_cs_detach’ u ndeclared here (not in a function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:672: warning: excess elements in struct initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:672: warning: (near initializatio n for ‘orinoco_driver’) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:674: error: unknown field ‘event’ specified in initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:674: warning: excess elements in struct initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:674: warning: (near initializatio n for ‘orinoco_driver’) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: In function ‘exit_orinoco_cs’: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:691: error: ‘dev_list’ undeclared (first use in this function) make[2]: *** [/home/lukas/intel/orinoco-0.15rc4/orinoco_cs.o] Error 1 make[1]: *** [_module_/home/lukas/intel/orinoco-0.15rc4] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.17-5mdv' make: *** [modules] Error 2 [root@localhost orinoco-0.15rc4]# make install make -C /usr/src/linux-2.6.17-5mdv M=/home/lukas/intel/orinoco-0.15rc4 KERNELREL EASE=2.6.11-6mdk modules make[1]: Entering directory `/usr/src/linux-2.6.17-5mdv'

WARNING: Symbol version dump /usr/src/linux-2.6.17-5mdv/Module.symvers is missing; modules will have no dependencies and modversions.

CC [M] /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.o /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:63: error: expected specifier-qua lifier-list before ‘dev_link_t’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:77: error: expected ‘=’, ‘,’, ‘;’ , ‘asm’ or ‘__attribute__’ before ‘*’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:83: error: expected ‘)’ before ‘* ’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:84: error: expected ‘)’ before ‘* ’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: In function ‘orinoco_cs_hard_res et’: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: ‘dev_link_t’ undeclare d (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: (Each undeclared ident ifier is reported only once /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: for each function it a ppears in.) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: ‘link’ undeclared (fir st use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:96: error: ‘struct orinoco_pccard ’ has no member named ‘link’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:97: warning: ISO C90 forbids mixe d declarations and code /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:100: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:107: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: At top level: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:124: error: expected ‘=’, ‘,’, ‘; ’, ‘asm’ or ‘__attribute__’ before ‘*’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:191: error: expected ‘)’ before ‘ *’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:232: error: expected ‘)’ before ‘ *’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:446: error: expected ‘)’ before ‘ *’ token /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: In function ‘orinoco_cs_event’: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:477: error: ‘dev_link_t’ undeclar ed (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:477: error: ‘link’ undeclared (fi rst use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:478: warning: ISO C90 forbids mix ed declarations and code /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:486: error: ‘DEV_PRESENT’ undecla red (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:487: error: ‘DEV_CONFIG’ undeclar ed (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:498: error: ‘DEV_CONFIG_PENDING’ undeclared (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:499: warning: implicit declaratio n of function ‘orinoco_cs_config’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:503: error: ‘DEV_SUSPEND’ undecla red (first use in this function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:511: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:511: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:527: warning: implicit declaratio n of function ‘pcmcia_release_configuration’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:540: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:540: error: ‘struct orinoco_pccar d’ has no member named ‘hard_reset_in_progress’ /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: At top level: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:671: error: unknown field ‘attach ’ specified in initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:671: error: ‘orinoco_cs_attach’ u ndeclared here (not in a function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:671: warning: excess elements in struct initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:671: warning: (near initializatio n for ‘orinoco_driver’) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:672: error: unknown field ‘detach ’ specified in initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:672: error: ‘orinoco_cs_detach’ u ndeclared here (not in a function) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:672: warning: excess elements in struct initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:672: warning: (near initializatio n for ‘orinoco_driver’) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:674: error: unknown field ‘event’ specified in initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:674: warning: excess elements in struct initializer /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:674: warning: (near initializatio n for ‘orinoco_driver’) /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c: In function ‘exit_orinoco_cs’: /home/lukas/intel/orinoco-0.15rc4/orinoco_cs.c:691: error: ‘dev_list’ undeclared (first use in this function) make[2]: *** [/home/lukas/intel/orinoco-0.15rc4/orinoco_cs.o] Error 1 make[1]: *** [_module_/home/lukas/intel/orinoco-0.15rc4] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.17-5mdv' make: *** [modules] Error 2

12.11.2006 17:50 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

problem bude asi v tom ze ten ovladac je pro starsi jadra, takze to chce pozit novjejsi. Ja se ti na to podivam a napisu ti jestli existuje reseni.

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

12.11.2006 18:01 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

no zkus pouzit novjejsi ovladac http://switch.dl.sourceforge.net/sourceforge/orinoco/orinoco-0.15.tar.gz

ale amm pocit ze ovladac by mel byt soucasti jadra.

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

12.11.2006 18:02 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

no zkus pouzit novjejsi ovladac http://switch.dl.sourceforge.net/sourceforge/orinoco/orinoco-0.15.tar.gz

ale amm pocit ze ovladac by mel byt soucasti jadra.

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

budem ti strasne vdacni..lebo mam v notebooku tu kartu a chcel by som pouzivat WIFI ..Teraz idem stale na kabel. V notebooku mam aj zabudovanu minipci prism54 a tiez ju neviem nainstalovat...paradox 2 wifi karty a idem na kabel..dakujem

12.11.2006 18:12 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

myslim ze ovladac uz by mel byt v jadre takze zadej jako root prikaz: modprobe orinoco_cs a potom pokracuj dle toho tveho navodu od bodu kde se prikazem tar.... rozbaluje ten balicek orinoco-fwutils ci tak nejak. akorat doporucuju si stahnout nejnovjejsi verzi http://puzzle.dl.sourceforge.net/sourceforge/orinoco/orinoco-fwutils-0.2.tar.gz

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

fakt ovladac je pouzity...nainstalovanie fwutil prebehlo uspesne ,ale karta v nastaveniach ostava neznama.netreba ju nejak ozivit v pcmcia ..napr.nejakymi prikazmi pre pcmcia???dakujem

12.11.2006 18:53 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

instalace probehla v poradku tim myslis aji ty dalsi bodu co byli v tom navode ? pokud jo tak zkus restartovat pc

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

12.11.2006 18:56 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

joa potom restartu zadej prikaz dmesg a hod ho sem ale dej ho do pre tagu to udelas tak ze pouzijes tu znacku pre co je nad okynkem kam pises prispevek

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

Značka HERMES@GIBSON.DROPBEAR.ID.AU není povolena!

co je to?...nemozem odoslat vypis

12.11.2006 19:20 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

no neni nahodou uzavrena v sipeckach pokud jo tak ty sipky odstran

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

[root@localhost lukas]# dmesg
Linux version 2.6.17-5mdv (rtp@octopus.mandriva.com) (gcc version 4.1.1 20060724
 (prerelease) (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001dee0000 (usable)
 BIOS-e820: 000000001dee0000 - 000000001deeb000 (ACPI data)
 BIOS-e820: 000000001deeb000 - 000000001df00000 (ACPI NVS)
 BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
0MB HIGHMEM available.
478MB LOWMEM available.
found SMP MP-table at 000f6ca0
On node 0 totalpages: 122592
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 118496 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 TOSCPL                                ) @ 0x000f6c70
ACPI: RSDT (v001 TOSCPL   RSDT   0x06040000  LTP 0x00000000) @ 0x1dee56ea
ACPI: FADT (v001 TOSCPL MONTARA  0x06040000 PTL  0x00000050) @ 0x1deeaf3c
ACPI: MADT (v001 PTLTD           APIC   0x06040000  LTP 0x00000000) @ 0x1deeafb0
ACPI: SSDT (v001  INTEL  EISTRef 0x00002000 INTL 0x20030224) @ 0x1dee571a
ACPI: DSDT (v001 TOSCPL MONTARAG 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=linux root=305 resume=/dev/hda6 splash=silent
bootsplash: silent mode.
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 3064.600 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 480744k/490368k available (2426k kernel code, 8504k reserved, 756k data,
 244k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6134.35 BogoMIPS (lpj=12268719)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 0
0000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 0000000
0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 339k freed
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel Mobile Intel(R) Pentium(R) 4     CPU 3.06GHz stepping 09
Total of 1 processors activated (6134.35 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=ass
ign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 5) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 7 11) *9
ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 7 11) *9
ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *9
ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:04: ioport range 0x600-0x60f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 3, cardbus bridge: 0000:02:04.0
  IO window: 00003800-000038ff
  IO window: 00003c00-00003cff
  PREFETCH window: 30000000-31ffffff
  MEM window: 34000000-35ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 3000-3fff
  MEM window: e0200000-e02fffff
  PREFETCH window: 30000000-31ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1163365283.884:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xe8000000, mapped to 0xde880000, using 3750k, total 3257
6k
vesafb: mode is 800x600x16, linelength=1600, pages=32
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 116205 by
tes,<6>...found (800x600, 116157 bytes, v3).
Console: switching to colour frame buffer device 93x31
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HITACHI_DK23FA-60, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITADVD-RAM UJ-811, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 >
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI wakeup devices:
ELAN USB1 USB2 USB3 EUSB MODM
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 244k freed
input: AT Translated Set 2 keyboard as /class/input/input0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
ts: Compaq touchscreen protocol output
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 2-1: USB disconnect, address 2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ieee1394: Initialized config rom entry `ip1394'
usb 4-5: new high speed USB device using ehci_hcd and address 3
usb 4-5: configuration #1 chosen from 1 choice
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[e0202000-e02027ff]  Max
 Packet=[2048]  IR/IT contexts=[4/8]
usb 2-1: new low speed USB device using uhci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
idVendor = 0xb05, idProduct = 0x1706
usbcore: registered new driver rtusb
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f3c3500160f]
toshiba: not a supported Toshiba laptop
Non-volatile memory driver v1.2
hw_random: cannot enable RNG, aborting
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 32636K stolen memory.
agpgart: AGP aperture is 128M @ 0xe8000000
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl 0x44
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000010
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
EXT3 FS on hda5, internal journal
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
pcmcia: registering new device pcmcia0.0
orinoco 0.15 (David Gibson hermes@gibson.dropbear.id.au, Pavel Roskin proski@
gnu.org, et al)
spectrum_cs 0.15 (Pavel Roskin proski@gnu.org, David Gibson hermes@gibson.dro
pbear.id.au, et al)
cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f 0x378-0x37f
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
spectrum_cs: Cannot find firmware: symbol_sp24t_prim_fw
spectrum_cs: Firmware download failed
eth0: failed to initialize firmware (err = -16)
spectrum_cs: register_netdev() failed
spectrum_cs: Cannot find firmware: symbol_sp24t_prim_fw
spectrum_cs: Firmware download failed
eth0: failed to initialize firmware (err = -16)
spectrum_cs: register_netdev() failed
Adding 1269092k swap on /dev/hda6.  Priority:-1 extents:1 across:1269092k
NTFS driver 2.1.27 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
loop: loaded (max 8 devices, max 1 partitions per device)
hdc: ATAPI 31X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Video Device [GFX0_PCI0] (multi-head: yes  rom: yes  post: no)
IPVS: Registered protocols (TCP, UDP, AH, ESP)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Each connection entry needs 120 bytes at least
IPVS: ipvs loaded.
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
NET: Registered protocol family 17
intel8x0_measure_ac97_clock: measured 59332 usecs
intel8x0: clocking to 48000
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 22
eth0: RealTek RTL8139 at 0xdf0d2800, 00:02:3f:d0:e3:47, IRQ 22
eth0:  Identified 8139 chip type 'RTL-8101'
eth0: link down
RT25usb  Driver version 1.0.0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.4.0 20060119 on minor 0
[drm] Initialized i915 1.4.0 20060119 on minor 1
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12546 b                               ytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12546 b                               ytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12546 b                               ytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12546 b                               ytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12546 b                               ytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12546 b                               ytes, v3).
bootsplash: status on console 5 changed to on
rausb0: no IPv6 routers present
ACPI Error (psargs-0353): [PBST] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._                               BST] (Node dde0d300), AE_NOT_FOUND
[root@localhost lukas]#

trochu to trvalo musel som pomazat nejake veci ohladom <><>

12.11.2006 21:51 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

problem je vtom ze v tom navodu je chybka takze krok

11) cp symbol_sp24t_* /usr/lib/hotplug/firmware/

je spatne musis udelat toto:

1. zjisti zda existuje adresar firmware v adresari /lib/
2. pokud existuje tak zadej cp symbol_sp24t_* /lib/firmware/
3. pokud neexistuje tak jako root zadej mkdir /lib/firmware a potom pokracuj krokem zadej cp symbol_sp24t_* /lib/firmware/
4. restartuj pc a melo by to byt ok pokud ne tak posli vypis dmesg na moji adresu kozzi11@gmail.com

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

12.11.2006 23:17 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

takze cele by to melo jit udelat takto:

1.)zapni konzoli(terminal)
2.)zadej su (prepne te to na roota)
3.)zadej cd /root
4.)zadej wget -c http://kent.dl.sourceforge.net/sourceforge/orinoco/orinoco-fwutils-0.2.tar.gz
5.)zadej tar -xvf orinoco-fwutils-0.2.tar.gz
6.)zadej cd orinoco-fwutils-0.2
7.)zadej ./get_symbol_fw (pockej az to vsechno stahne)
8.)zadej cp -rf symbol_sp24t_* /lib/firmware/
9.)reset pc a melo by to byt ok(posli mi kdyztak zase ten dmesg)

Linux je jako mušketýři "jeden za všechny, všichni za jednoho"

Vdaka..karta nabehla zacala blikat ,ale pokial ju idem nastavit cez iwconfig tak mi nijake zariadenie nenajde.

no wireless extensions.

Dotaz: Intel PRO/Wireless 2011B LAN PC Card (PCMCIA)

Odpovědi