Macbook Air 13.3''

Identifikace pod Linuxem

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QS77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01

Postup zprovoznění pod Linuxem

Testoval jsem s openSUSE 12.2 s jadrem 3.4.6.

Pro dual-boot s MacOS X je potreba nainstalovat rEFIt a zmensit partition primo v MacOS X, instalator to neumi. Pokud se /boot (linuxu) nachazel na jinem nez na ctvrtem svazku, mel s tim rEFIt problem.

Pro nabootovani/spusteni instalace je potreba jadru predat parametr "nointremap", tento parametr je nutne nastavit pozdeji i v GRUBu.

Ovladac WiFi nefunguje out-of-the-box. Je potreba stahnout http://www.lwfinger.com/b43-firmware/broadcom-wl-5.100.138.tar.bz firmware a pres b43-fwcutter ho vyextrahovat. Pro nahrati noveho firmwaru je potreba restart, rmmod b43 u me koncilo padem jadra.

Modul applesmc slouzici k ovladani vetraku, podsviceni, atd. nefunguje. Je potreba jednoradkova uprava.

V souboru /usr/src/linux/drivers/hwmon/applesmc.c je nutne zmenit radek

#define APPLESMC_MIN_WAIT        0x0040

na

#define APPLESMC_MIN_WAIT       0x0010

a cely modul prekompilovat a nainstalovat.

K ovladani podsviceni displaye/klavesnice pouzivam program lightum.

Jinak vse funguje bez problemu.

Dokument vytvořil: deda.jabko, 26.8.2012 18:34 | Zobrazeno: 644×