Administrace komentářů

Omlouvám se, nejsem znalec, jen trochu poučený uživatel SUSE (10 let na dvou ntb a jednom PC). Díky předem za rady a snahu.

linux-6g8o:/home/jan # dmesg
[    0.000000] Linux version 4.12.14-lp151.28.44-default (geeko@buildhost) (gcc version 7.5.0 (SUSE Linux) ) #1 SMP Fri Mar 20 18:20:20 UTC 2020 (dbf1aea)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.44-default root=/dev/mapper/system-root splash=silent resume=/dev/system/swap mitigations=auto quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf7affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf7b0000-0x00000000bf7c53ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf7c5400-0x00000000bf7e7fb7] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7e7fb8-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed99fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq 6710b/30C0, BIOS 68DDU Ver. F.20 12/01/2011
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Using PIT calibration value
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 base 0FEDA0000 mask FFFFE0000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbf7b0 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x03090000, 0x03090fff] PGTABLE
[    0.000000] BRK [0x03091000, 0x03091fff] PGTABLE
[    0.000000] BRK [0x03092000, 0x03092fff] PGTABLE
[    0.000000] BRK [0x03093000, 0x03093fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36389000-0x371bbfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F72C0 000024 (v02 HP    )
[    0.000000] ACPI: XSDT 0x00000000BF7C81CC 000084 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: FACP 0x00000000BF7C8084 0000F4 (v04 HP     30C0     00000003 HP   00000001)
[    0.000000] ACPI: DSDT 0x00000000BF7C84D8 01313E (v01 HP     nc75xx   00010000 MSFT 03000001)
[    0.000000] ACPI: FACS 0x00000000BF7E7D80 000040
[    0.000000] ACPI: FACS 0x00000000BF7E7D80 000040
[    0.000000] ACPI: SLIC 0x00000000BF7C8250 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: HPET 0x00000000BF7C83C8 000038 (v01 HP     30C0     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x00000000BF7C8400 000068 (v01 HP     30C0     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x00000000BF7C8468 00003C (v01 HP     30C0     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 0x00000000BF7C84A4 000032 (v02 HP     30C0     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000BF7DB616 000059 (v01 HP     HPQNLP   00000001 MSFT 03000001)
[    0.000000] ACPI: SSDT 0x00000000BF7DB66F 000328 (v01 HP     HPQSAT   00000001 MSFT 03000001)
[    0.000000] ACPI: SSDT 0x00000000BF7DB997 00017D (v01 HP     HPQMRM   00000001 MSFT 03000001)
[    0.000000] ACPI: SSDT 0x00000000BF7DC498 00025F (v01 HP     Cpu0Tst  00003000 INTL 20060317)
[    0.000000] ACPI: SSDT 0x00000000BF7DC6F7 0000A6 (v01 HP     Cpu1Tst  00003000 INTL 20060317)
[    0.000000] ACPI: SSDT 0x00000000BF7DC79D 0004D7 (v01 HP     CpuPm    00003000 INTL 20060317)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13ffe7000-0x13fffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf7affff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1046350
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12191 pages used for memmap
[    0.000000]   DMA32 zone: 780208 pages, LIFO batch:63
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:63
[    0.000000] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7b0000-0xbf7c4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7c5000-0xbf7c5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7c6000-0xbf7e6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7e7000-0xbf7e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7e8000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed99fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed9a000-0xfed9ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 48 pages/cpu @ffff88013fc00000 s159744 r8192 d28672 u1048576
[    0.000000] pcpu-alloc: s159744 r8192 d28672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029978
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.44-default root=/dev/mapper/system-root splash=silent resume=/dev/system/swap mitigations=auto quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 4005364K/4185400K available (10256K kernel code, 1479K rwdata, 3356K rodata, 2108K init, 9888K bss, 180036K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 34441 entries in 135 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU event tracing is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2194.395 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.79 BogoMIPS (lpj=8777580)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170303
[    0.004000] Security Framework initialized
[    0.004000] AppArmor: AppArmor initialized
[    0.009065] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010300] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010370] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010410] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010754] process: using mwait in idle threads
[    0.010760] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.010762] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.010764] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.010766] Spectre V2 : Mitigation: Full generic retpoline
[    0.010767] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.010768] Speculative Store Bypass: Vulnerable
[    0.010808] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.011018] Freeing SMP alternatives memory: 32K
[    0.016565] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz (family: 0x6, model: 0xf, stepping: 0xb)
[    0.060000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.060000] core: PEBS disabled due to CPU errata
[    0.060000] ... version:                2
[    0.060000] ... bit width:              40
[    0.060000] ... generic registers:      2
[    0.060000] ... value mask:             000000ffffffffff
[    0.060000] ... max period:             000000007fffffff
[    0.060000] ... fixed-purpose events:   3
[    0.060000] ... event mask:             0000000700000003
[    0.060000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.060000] smp: Bringing up secondary CPUs ...
[    0.060000] x86: Booting SMP configuration:
[    0.060000] .... node  #0, CPUs:      #1
[    0.060031] smp: Brought up 1 node, 2 CPUs
[    0.060031] smpboot: Max logical packages: 1
[    0.060031] smpboot: Total of 2 processors activated (8777.58 BogoMIPS)
[    0.061883] devtmpfs: initialized
[    0.061883] x86/mm: Memory block size: 128MB
[    0.066108] evm: security.selinux
[    0.066108] evm: security.ima
[    0.066109] evm: security.capability
[    0.066149] PM: Registering ACPI NVS region [mem 0xbf7c5400-0xbf7e7fb7] (142264 bytes)
[    0.066149] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.066149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.066149] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.066149] pinctrl core: initialized pinctrl subsystem
[    0.066149] RTC time: 23:41:44, date: 04/04/20
[    0.066149] NET: Registered protocol family 16
[    0.066149] cpuidle: using governor ladder
[    0.066149] cpuidle: using governor menu
[    0.066149] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.066149] ACPI: bus type PCI registered
[    0.066149] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.066149] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.066149] PCI: not using MMCONFIG
[    0.066149] PCI: Using configuration type 1 for base access
[    0.066149] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.066149] mtrr: probably your BIOS does not setup all CPUs.
[    0.066149] mtrr: corrected configuration.
[    0.068595] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.068595] ACPI: Added _OSI(Module Device)
[    0.068595] ACPI: Added _OSI(Processor Device)
[    0.068595] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.068595] ACPI: Added _OSI(Processor Aggregator Device)
[    0.084209] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.117580] ACPI: Dynamic OEM Table Load:
[    0.117588] ACPI: SSDT 0xFFFF88013A5CDC00 00023D (v01 HP     Cpu0Ist  00003000 INTL 20060317)
[    0.118082] ACPI: Dynamic OEM Table Load:
[    0.118089] ACPI: SSDT 0xFFFF88013A5D1800 0005FA (v01 HP     Cpu0Cst  00003001 INTL 20060317)
[    0.118563] ACPI: Dynamic OEM Table Load:
[    0.118568] ACPI: SSDT 0xFFFF88013A5B4A00 0000C8 (v01 HP     Cpu1Ist  00003000 INTL 20060317)
[    0.118839] ACPI: Dynamic OEM Table Load:
[    0.118844] ACPI: SSDT 0xFFFF88013A5B83C0 000085 (v01 HP     Cpu1Cst  00003000 INTL 20060317)
[    0.119545] ACPI : EC: EC started
[    0.119546] ACPI : EC: interrupt blocked
[    0.137073] ACPI: \_SB_.C003.C004.C006: Used as first EC
[    0.137076] ACPI: \_SB_.C003.C004.C006: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.137078] ACPI: \_SB_.C003.C004.C006: Used as boot DSDT EC to handle transactions
[    0.137078] ACPI: Interpreter enabled
[    0.137100] ACPI: (supports S0 S3 S4 S5)
[    0.137102] ACPI: Using IOAPIC for interrupt routing
[    0.137143] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.138066] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.138077] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.138518] ACPI: Enabled 16 GPEs in block 00 to 1F
[    0.143001] ACPI: Power Resource [C272] (off)
[    0.143966] ACPI: Power Resource [C27F] (on)
[    0.148349] ACPI: Power Resource [C29B] (on)
[    0.153668] ACPI: Power Resource [C1C5] (off)
[    0.157830] ACPI: Power Resource [C3BC] (off)
[    0.157921] ACPI: Power Resource [C3BD] (off)
[    0.158014] ACPI: Power Resource [C3BE] (off)
[    0.158106] ACPI: Power Resource [C3BF] (off)
[    0.158197] ACPI: Power Resource [C3C0] (off)
[    0.164688] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
[    0.164695] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.164701] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.164715] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.170566] PCI host bridge to bus 0000:00
[    0.170569] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.170570] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.170572] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.170574] pci_bus 0000:00: root bus resource [mem 0xbf800000-0xfedfffff window]
[    0.170575] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    0.170577] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000dffff window]
[    0.170579] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.170589] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.170752] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    0.170765] pci 0000:00:02.0: reg 0x10: [mem 0xe4600000-0xe46fffff 64bit]
[    0.170773] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.170779] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x4007]
[    0.170933] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    0.170944] pci 0000:00:02.1: reg 0x10: [mem 0xe4700000-0xe47fffff 64bit]
[    0.171146] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.171204] pci 0000:00:1a.0: reg 0x20: [io  0x4020-0x403f]
[    0.171375] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.171433] pci 0000:00:1a.1: reg 0x20: [io  0x4040-0x405f]
[    0.171613] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.171635] pci 0000:00:1a.7: reg 0x10: [mem 0xe4800000-0xe48003ff]
[    0.171753] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.171900] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.171928] pci 0000:00:1b.0: reg 0x10: [mem 0xe4804000-0xe4807fff 64bit]
[    0.172062] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.172219] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.172356] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.172518] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.172656] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.172817] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[    0.172954] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.173116] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[    0.173254] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.173413] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.173471] pci 0000:00:1d.0: reg 0x20: [io  0x4060-0x407f]
[    0.173639] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.173698] pci 0000:00:1d.1: reg 0x20: [io  0x4080-0x409f]
[    0.173867] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.173925] pci 0000:00:1d.2: reg 0x20: [io  0x40a0-0x40bf]
[    0.174103] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.174125] pci 0000:00:1d.7: reg 0x10: [mem 0xe4808000-0xe48083ff]
[    0.174242] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.174382] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.174608] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.174738] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.174744] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
[    0.174748] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[    0.174755] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[    0.174915] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.174933] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.174945] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.174957] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.174968] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.174980] pci 0000:00:1f.1: reg 0x20: [io  0x40c0-0x40cf]
[    0.175007] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.175008] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.175010] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.175011] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.175155] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.175179] pci 0000:00:1f.2: reg 0x10: [io  0x13f0-0x13f7]
[    0.175190] pci 0000:00:1f.2: reg 0x14: [io  0x15f4-0x15f7]
[    0.175202] pci 0000:00:1f.2: reg 0x18: [io  0x1370-0x1377]
[    0.175214] pci 0000:00:1f.2: reg 0x1c: [io  0x1574-0x1577]
[    0.175226] pci 0000:00:1f.2: reg 0x20: [io  0x4100-0x411f]
[    0.175238] pci 0000:00:1f.2: reg 0x24: [mem 0xe4809000-0xe48097ff]
[    0.175313] pci 0000:00:1f.2: PME# supported from D3hot
[    0.175512] pci 0000:00:1c.0: PCI bridge to [bus 08]
[    0.175624] pci 0000:10:00.0: [14e4:4312] type 00 class 0x028000
[    0.175668] pci 0000:10:00.0: reg 0x10: [mem 0xe4100000-0xe4103fff 64bit]
[    0.175757] pci 0000:10:00.0: enabling Extended Tags
[    0.175886] pci 0000:10:00.0: supports D1 D2
[    0.188031] pci 0000:00:1c.1: PCI bridge to [bus 10]
[    0.188038] pci 0000:00:1c.1:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.188186] acpiphp: Slot [1] registered
[    0.188219] pci 0000:18:00.0: [14e4:1693] type 00 class 0x020000
[    0.188263] pci 0000:18:00.0: reg 0x10: [mem 0xe4000000-0xe400ffff 64bit]
[    0.188351] pci 0000:18:00.0: enabling Extended Tags
[    0.188493] pci 0000:18:00.0: PME# supported from D3hot D3cold
[    0.200068] pci 0000:00:1c.2: PCI bridge to [bus 18]
[    0.200076] pci 0000:00:1c.2:   bridge window [mem 0xe4000000-0xe40fffff]
[    0.200230] acpiphp: Slot [1-1] registered
[    0.200277] pci 0000:00:1c.4: PCI bridge to [bus 28]
[    0.200282] pci 0000:00:1c.4:   bridge window [io  0x2000-0x3fff]
[    0.200287] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xe3ffffff]
[    0.200374] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700
[    0.200402] pci 0000:02:04.0: reg 0x10: [mem 0xe4200000-0xe4200fff]
[    0.200463] pci 0000:02:04.0: supports D1 D2
[    0.200465] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.200550] pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010
[    0.200575] pci 0000:02:04.1: reg 0x10: [mem 0xe4201000-0xe42017ff]
[    0.200715] pci 0000:02:04.1: supports D1 D2
[    0.200716] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.200847] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[    0.200854] pci 0000:00:1e.0:   bridge window [mem 0xe4200000-0xe45fffff]
[    0.200862] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.200864] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.200866] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.200868] pci 0000:00:1e.0:   bridge window [mem 0xbf800000-0xfedfffff window] (subtractive decode)
[    0.200870] pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff window] (subtractive decode)
[    0.200871] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000dffff window] (subtractive decode)
[    0.200932] pci_bus 0000:03: busn_res: [bus 03] end can not be updated to 06
[    0.200938] pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
[    0.202849] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
[    0.203039] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
[    0.203228] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
[    0.203407] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
[    0.203597] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
[    0.203785] ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
[    0.203962] ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
[    0.204141] ACPI: PCI Interrupt Link [C143] (IRQs) *0, disabled.
[    0.205379] ACPI : EC: interrupt unblocked
[    0.205393] ACPI : EC: event unblocked
[    0.205402] ACPI: \_SB_.C003.C004.C006: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.205404] ACPI: \_SB_.C003.C004.C006: Used as boot DSDT EC to handle transactions and events
[    0.205483] iommu: Default domain type: Passthrough 
[    0.205505] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.205505] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.205505] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.205505] vgaarb: loaded
[    0.205505] SCSI subsystem initialized
[    0.205505] libata version 3.00 loaded.
[    0.205505] Linux cec interface: v0.10
[    0.205505] EDAC MC: Ver: 3.0.0
[    0.205505] PCI: Using ACPI for IRQ routing
[    0.208473] PCI: pci_cache_line_size set to 64 bytes
[    0.208627] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.208630] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.208631] e820: reserve RAM buffer [mem 0xbf7b0000-0xbfffffff]
[    0.208766] NetLabel: Initializing
[    0.208767] NetLabel:  domain hash size = 128
[    0.208768] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.208791] NetLabel:  unlabeled traffic allowed by default
[    0.208824] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.208824] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.208824] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.210121] clocksource: Switched to clocksource hpet
[    0.226583] VFS: Disk quotas dquot_6.6.0
[    0.226626] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.226792] AppArmor: AppArmor Filesystem Enabled
[    0.226851] pnp: PnP ACPI init
[    0.227123] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.227126] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.227128] system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
[    0.227133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.228086] pnp 00:01: [dma 1]
[    0.228195] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.228347] pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.228393] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.228454] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.228491] pnp 00:05: Plug and Play ACPI device, IDs SYN0134 SYN0100 SYN0002 PNP0f13 (active)
[    0.228755] system 00:06: [io  0x0500-0x055f] has been reserved
[    0.228757] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.228760] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.228762] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[    0.228765] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.229930] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.229933] system 00:07: [io  0x1000-0x107f] has been reserved
[    0.229935] system 00:07: [io  0x1100-0x113f] has been reserved
[    0.229937] system 00:07: [io  0x1200-0x121f] has been reserved
[    0.229939] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.229941] system 00:07: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.229943] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.229946] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.229948] system 00:07: [mem 0xfed90000-0xfed99fff] has been reserved
[    0.229951] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.231518] system 00:08: [mem 0x000cee00-0x000cffff] has been reserved
[    0.231520] system 00:08: [mem 0x000d2a00-0x000d3fff] has been reserved
[    0.231523] system 00:08: [mem 0xfeda0000-0xfedbffff] has been reserved
[    0.231525] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.231528] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.231546] pnp: PnP ACPI: found 9 devices
[    0.238385] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.238414] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 10] add_size 1000
[    0.238418] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000 add_align 100000
[    0.238429] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 18] add_size 1000
[    0.238432] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 18] add_size 200000 add_align 100000
[    0.238443] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28] add_size 200000 add_align 100000
[    0.238464] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
[    0.238479] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.238484] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.238489] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.238492] pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
[    0.238495] pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
[    0.238498] pci 0000:00:1e.0: BAR 13: assigned [io  0x7000-0x7fff]
[    0.238502] pci 0000:00:1c.0: PCI bridge to [bus 08]
[    0.238517] pci 0000:00:1c.1: PCI bridge to [bus 10]
[    0.238520] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.238526] pci 0000:00:1c.1:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.238531] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.238538] pci 0000:00:1c.2: PCI bridge to [bus 18]
[    0.238541] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
[    0.238547] pci 0000:00:1c.2:   bridge window [mem 0xe4000000-0xe40fffff]
[    0.238552] pci 0000:00:1c.2:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.238559] pci 0000:00:1c.4: PCI bridge to [bus 28]
[    0.238562] pci 0000:00:1c.4:   bridge window [io  0x2000-0x3fff]
[    0.238568] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xe3ffffff]
[    0.238572] pci 0000:00:1c.4:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.238583] pci 0000:02:04.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
[    0.238586] pci 0000:02:04.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[    0.238588] pci 0000:02:04.0: BAR 13: assigned [io  0x7000-0x70ff]
[    0.238590] pci 0000:02:04.0: BAR 14: assigned [io  0x7400-0x74ff]
[    0.238592] pci 0000:02:04.0: CardBus bridge to [bus 03]
[    0.238594] pci 0000:02:04.0:   bridge window [io  0x7000-0x70ff]
[    0.238599] pci 0000:02:04.0:   bridge window [io  0x7400-0x74ff]
[    0.238605] pci 0000:02:04.0:   bridge window [mem 0xc4000000-0xc7ffffff pref]
[    0.238610] pci 0000:02:04.0:   bridge window [mem 0xc8000000-0xcbffffff]
[    0.238615] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[    0.238618] pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
[    0.238624] pci 0000:00:1e.0:   bridge window [mem 0xe4200000-0xe45fffff]
[    0.238635] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.238637] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.238639] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.238640] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff window]
[    0.238642] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff window]
[    0.238644] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000dffff window]
[    0.238646] pci_bus 0000:10: resource 0 [io  0x5000-0x5fff]
[    0.238647] pci_bus 0000:10: resource 1 [mem 0xe4100000-0xe41fffff]
[    0.238649] pci_bus 0000:10: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.238650] pci_bus 0000:18: resource 0 [io  0x6000-0x6fff]
[    0.238652] pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe40fffff]
[    0.238653] pci_bus 0000:18: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.238655] pci_bus 0000:28: resource 0 [io  0x2000-0x3fff]
[    0.238657] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
[    0.238658] pci_bus 0000:28: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.238660] pci_bus 0000:02: resource 0 [io  0x7000-0x7fff]
[    0.238661] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff]
[    0.238663] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.238665] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.238666] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.238668] pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff window]
[    0.238669] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff window]
[    0.238671] pci_bus 0000:02: resource 9 [mem 0x000d4000-0x000dffff window]
[    0.238673] pci_bus 0000:03: resource 0 [io  0x7000-0x70ff]
[    0.238674] pci_bus 0000:03: resource 1 [io  0x7400-0x74ff]
[    0.238676] pci_bus 0000:03: resource 2 [mem 0xc4000000-0xc7ffffff pref]
[    0.238677] pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff]
[    0.238832] NET: Registered protocol family 2
[    0.239055] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.239191] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.239397] TCP: Hash tables configured (established 32768 bind 32768)
[    0.239463] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.239492] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.239561] NET: Registered protocol family 1
[    0.239567] NET: Registered protocol family 44
[    0.239581] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.243109] PCI: CLS 64 bytes, default 64
[    0.243168] Unpacking initramfs...
[    2.198012] Freeing initrd memory: 14540K
[    2.198074] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.198078] software IO TLB [mem 0xbb7b0000-0xbf7b0000] (64MB) mapped at [ffff8800bb7b0000-ffff8800bf7affff]
[    2.198236] Scanning for low memory corruption every 60 seconds
[    2.198634] audit: initializing netlink subsys (disabled)
[    2.198766] audit: type=2000 audit(1586043706.192:1): state=initialized audit_enabled=0 res=1
[    2.199282] workingset: timestamp_bits=37 max_order=20 bucket_order=0
[    2.199326] zbud: loaded
[    2.201442] Key type asymmetric registered
[    2.201444] Asymmetric key parser 'x509' registered
[    2.201456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.201501] io scheduler noop registered
[    2.201502] io scheduler deadline registered
[    2.201521] io scheduler cfq registered (default)
[    2.201522] io scheduler mq-deadline registered
[    2.201523] io scheduler kyber registered
[    2.201534] io scheduler bfq registered
[    2.203145] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.203183] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    2.203183] vesafb: scrolling: redraw
[    2.203185] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.203203] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 5120k, total 5120k
[    2.243120] Console: switching to colour frame buffer device 160x64
[    2.282855] fb0: VESA VGA frame buffer device
[    2.282873] intel_idle: does not run on family 6 model 15
[    2.286555] Monitor-Mwait will be used to enter C-1 state
[    2.286567] Monitor-Mwait will be used to enter C-2 state
[    2.286573] tsc: Marking TSC unstable due to TSC halts in idle
[    2.288483] GHES: HEST is not enabled!
[    2.288615] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.291087] Non-volatile memory driver v1.3
[    2.291136] Linux agpgart interface v0.103
[    2.294452] tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16)
[    2.299600] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
[    2.304616] tpm tpm0: Adjusting TPM timeout parameters.
[    2.857043] random: fast init done
[    3.228073] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa183fbceb, max_idle_ns: 440795255817 ns
[    3.285311] tpm tpm0: TPM is disabled/deactivated (0x7)
[    3.313396] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
[    3.314986] i8042: Detected active multiplexing controller, rev 1.1
[    3.315696] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.315701] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.315737] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.315768] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.315798] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.316013] mousedev: PS/2 mouse device common for all mice
[    3.316130] rtc_cmos 00:03: RTC can wake from S4
[    3.316335] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.316366] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.316422] ledtrig-cpu: registered to indicate activity on CPUs
[    3.316438] hidraw: raw HID events driver (C) Jiri Kosina
[    3.316605] NET: Registered protocol family 10
[    3.323863] Segment Routing with IPv6
[    3.324123] mce: Using 6 MCE banks
[    3.324166] microcode: sig=0x6fb, pf=0x80, revision=0xba
[    3.324207] microcode: Microcode Update Driver: v2.2.
[    3.324343] registered taskstats version 1
[    3.324364] zswap: loaded using pool lzo/zbud
[    3.324517] page_owner is disabled
[    3.330902] Key type big_key registered
[    3.334012] Key type encrypted registered
[    3.334015] AppArmor: AppArmor sha1 policy hashing enabled
[    3.338317] ima: No TPM chip found, activating TPM-bypass! (rc=7)
[    3.338320] ima: Allocated hash algorithm: sha256
[    3.338342] evm: HMAC attrs: 0x1
[    3.338586]   Magic number: 0:860:705
[    3.338777] rtc_cmos 00:03: setting system clock to 2020-04-04 23:41:47 UTC (1586043707)
[    3.338832] PM: Checking hibernation image partition /dev/system/swap
[    3.341023] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.038557] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0/0x0, board id: 0, fw id: 240405
[    4.038560] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[    4.078562] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    4.082056] PM: Hibernation image not present or could not be loaded.
[    4.084992] Freeing unused kernel memory: 2108K
[    4.096081] Write protecting the kernel read-only data: 16384k
[    4.097330] Freeing unused kernel memory: 2020K
[    4.099688] Freeing unused kernel memory: 740K
[    4.105321] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    4.109603] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[    4.109766] systemd[1]: Detected architecture x86-64.
[    4.109771] systemd[1]: Running in initial RAM disk.
[    4.109795] systemd[1]: Set hostname to .
[    4.174477] random: systemd: uninitialized urandom read (16 bytes read)
[    4.174522] systemd[1]: Listening on udev Kernel Socket.
[    4.174595] random: systemd: uninitialized urandom read (16 bytes read)
[    4.175208] systemd[1]: Created slice System Slice.
[    4.175235] random: systemd: uninitialized urandom read (16 bytes read)
[    4.175753] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
[    4.175836] systemd[1]: Listening on udev Control Socket.
[    4.175891] systemd[1]: Reached target Swap.
[    4.175926] systemd[1]: Reached target Slices.
[    4.196152] alua: device handler registered
[    4.196568] emc: device handler registered
[    4.196855] rdac: device handler registered
[    4.207828] device-mapper: uevent: version 1.0.3
[    4.207920] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    4.944625] ACPI: bus type USB registered
[    4.944659] usbcore: registered new interface driver usbfs
[    4.944671] usbcore: registered new interface driver hub
[    4.944701] usbcore: registered new device driver usb
[    4.946390] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.946622] ehci-pci: EHCI PCI platform driver
[    4.946937] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    4.946949] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    4.946965] ehci-pci 0000:00:1a.7: debug port 1
[    4.950897] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    4.950918] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe4800000
[    4.951858] uhci_hcd: USB Universal Host Controller Interface driver
[    4.965483] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.965562] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.965564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.965566] usb usb1: Product: EHCI Host Controller
[    4.965568] usb usb1: Manufacturer: Linux 4.12.14-lp151.28.44-default ehci_hcd
[    4.965570] usb usb1: SerialNumber: 0000:00:1a.7
[    4.965755] hub 1-0:1.0: USB hub found
[    4.965764] hub 1-0:1.0: 4 ports detected
[    4.966233] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    4.966239] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    4.966255] ehci-pci 0000:00:1d.7: debug port 1
[    4.970183] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    4.970234] ehci-pci 0000:00:1d.7: irq 20, io mem 0xe4808000
[    4.984588] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.986060] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.986062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.986064] usb usb2: Product: EHCI Host Controller
[    4.986066] usb usb2: Manufacturer: Linux 4.12.14-lp151.28.44-default ehci_hcd
[    4.986068] usb usb2: SerialNumber: 0000:00:1d.7
[    4.986251] hub 2-0:1.0: USB hub found
[    4.986260] hub 2-0:1.0: 6 ports detected
[    4.987854] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.987862] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.987874] uhci_hcd 0000:00:1a.0: detected 2 ports
[    4.987914] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
[    4.987996] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.987998] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.988000] usb usb3: Product: UHCI Host Controller
[    4.988042] usb usb3: Manufacturer: Linux 4.12.14-lp151.28.44-default uhci_hcd
[    4.988044] usb usb3: SerialNumber: 0000:00:1a.0
[    4.988199] hub 3-0:1.0: USB hub found
[    4.988208] hub 3-0:1.0: 2 ports detected
[    4.988542] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.988548] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    4.988557] uhci_hcd 0000:00:1a.1: detected 2 ports
[    4.988586] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
[    4.988655] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.988657] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.988659] usb usb4: Product: UHCI Host Controller
[    4.988660] usb usb4: Manufacturer: Linux 4.12.14-lp151.28.44-default uhci_hcd
[    4.988662] usb usb4: SerialNumber: 0000:00:1a.1
[    4.988791] hub 4-0:1.0: USB hub found
[    4.988800] hub 4-0:1.0: 2 ports detected
[    4.989121] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.989127] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    4.989135] uhci_hcd 0000:00:1d.0: detected 2 ports
[    4.989158] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
[    4.989230] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.989232] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.989234] usb usb5: Product: UHCI Host Controller
[    4.989236] usb usb5: Manufacturer: Linux 4.12.14-lp151.28.44-default uhci_hcd
[    4.989237] usb usb5: SerialNumber: 0000:00:1d.0
[    4.989363] hub 5-0:1.0: USB hub found
[    4.989371] hub 5-0:1.0: 2 ports detected
[    4.989707] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.989714] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    4.989723] uhci_hcd 0000:00:1d.1: detected 2 ports
[    4.989749] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
[    4.989816] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    4.989818] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.989820] usb usb6: Product: UHCI Host Controller
[    4.989821] usb usb6: Manufacturer: Linux 4.12.14-lp151.28.44-default uhci_hcd
[    4.989823] usb usb6: SerialNumber: 0000:00:1d.1
[    4.989952] hub 6-0:1.0: USB hub found
[    4.989960] hub 6-0:1.0: 2 ports detected
[    4.990278] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.990283] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    4.990292] uhci_hcd 0000:00:1d.2: detected 2 ports
[    4.990314] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
[    4.990384] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    4.990386] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.990387] usb usb7: Product: UHCI Host Controller
[    4.990389] usb usb7: Manufacturer: Linux 4.12.14-lp151.28.44-default uhci_hcd
[    4.990391] usb usb7: SerialNumber: 0000:00:1d.2
[    4.990515] hub 7-0:1.0: USB hub found
[    4.990525] hub 7-0:1.0: 2 ports detected
[    5.001240] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c0]
[    5.004801] ahci 0000:00:1f.2: version 3.0
[    5.005128] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    5.005151] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[    5.005153] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc 
[    5.037641] scsi host0: ahci
[    5.038061] VFIO - User Level meta-driver version: 0.3
[    5.056037] scsi host1: ahci
[    5.132106] scsi host2: ahci
[    5.132201] ata1: SATA max UDMA/133 abar m2048@0xe4809000 port 0xe4809100 irq 24
[    5.132203] ata2: DUMMY
[    5.132204] ata3: DUMMY
[    5.136804] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 16
[    5.136808] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[    5.136814] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
[    5.136817] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe45fffff]
[    5.136820] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe45fffff:
[    5.136823]  excluding 0xe4200000-0xe423ffff
[    5.213976] pci 0000:00:00.0: Intel 965GM Chipset
[    5.213995] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    5.214921] pci 0000:00:00.0: detected 8192K stolen memory
[    5.214969] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[    5.214970] fb: switching to inteldrmfb from VESA VGA
[    5.215027] Console: switching to colour dummy device 80x25
[    5.220090] [drm] Replacing VGA console driver
[    5.221850] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.221851] [drm] Driver supports precise vblank timestamp query.
[    5.222534] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.261401] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[    5.261410]  excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[    5.261465] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[    5.261475]  excluding 0xa0000000-0xa0ffffff
[    5.261521] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[    5.261531]  excluding 0x60000000-0x60ffffff
[    5.262088] [drm] RC6 disabled, disabling runtime PM support
[    5.262182] [drm] Initialized overlay support.
[    5.262886] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    5.264692] ACPI: Video Device [C098] (multi-head: yes  rom: no  post: no)
[    5.265628] acpi device:01: registered as cooling_device2
[    5.265793] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    5.267449] ata_piix 0000:00:1f.1: version 2.13
[    5.279770] scsi host3: ata_piix
[    5.283391] scsi host4: ata_piix
[    5.283453] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[    5.283455] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[    5.283957] ata5: port disabled--ignoring
[    5.284311] fbcon: inteldrmfb (fb0) is primary device
[    5.304318] firewire_ohci 0000:02:04.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    5.446426] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.448569] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    5.448571] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    5.448691] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[    5.448693] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    5.449064] ata1.00: ATA-8: FUJITSU MHY2160BH, 890B, max UDMA/100
[    5.449066] ata1.00: 312581808 sectors, multi 16: LBA48 
[    5.451255] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    5.451257] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    5.451378] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[    5.451380] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    5.451757] ata1.00: configured for UDMA/100
[    5.451916] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHY2160B 890B PQ: 0 ANSI: 5
[    5.452558] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    5.452574] sd 0:0:0:0: [sda] Write Protect is off
[    5.452576] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.452605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.453271] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.460466] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2
[    5.484342] ata4.00: configured for MWDMA2
[    5.524040] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[    5.564651]  sda: sda1 sda2
[    5.565321] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.707180] usb 5-2: New USB device found, idVendor=08ff, idProduct=2580
[    5.707182] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.707184] usb 5-2: Product: Fingerprint Sensor
[    5.820111] firewire_core 0000:02:04.1: created device fw0: GUID 00023f9929853210, S400
[    5.982048] Console: switching to colour frame buffer device 210x65
[    5.998787] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.019761] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WC05 PQ: 0 ANSI: 5
[    6.077842] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[    6.131406] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.131411] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.132579] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    6.356024] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[    6.534093] usb 7-1: New USB device found, idVendor=0566, idProduct=3002
[    6.534098] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.579452] usbcore: registered new interface driver usbhid
[    6.579455] usbhid: USB HID core driver
[    6.581242] input: HID 0566:3002 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/0003:0566:3002.0001/input/input11
[    6.644768] hid-generic 0003:0566:3002.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:1d.2-1/input0
[    6.645144] input: HID 0566:3002 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.1/0003:0566:3002.0002/input/input12
[    6.704651] hid-generic 0003:0566:3002.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:1d.2-1/input1
[    6.788191] random: crng init done
[    6.788193] random: 7 urandom warning(s) missed due to ratelimiting
[    7.164014] raid6: sse2x1   gen()  6559 MB/s
[    7.232010] raid6: sse2x1   xor()  3988 MB/s
[    7.300010] raid6: sse2x2   gen()  8032 MB/s
[    7.368012] raid6: sse2x2   xor()  4943 MB/s
[    7.436010] raid6: sse2x4   gen()  8109 MB/s
[    7.504010] raid6: sse2x4   xor()  2722 MB/s
[    7.504011] raid6: using algorithm sse2x4 gen() 8109 MB/s
[    7.504012] raid6: .... xor() 2722 MB/s, rmw enabled
[    7.504014] raid6: using ssse3x2 recovery algorithm
[    7.508551] xor: measuring software checksum speed
[    7.548027]    prefetch64-sse:  8708.000 MB/sec
[    7.588027]    generic_sse:  7718.000 MB/sec
[    7.588028] xor: using function: prefetch64-sse (8708.000 MB/sec)
[    7.623803] Btrfs loaded, crc32c=crc32c-generic, assert=on
[    7.624589] BTRFS: device fsid e3869ebc-6be2-4980-92dd-f4ffc7db6565 devid 1 transid 18686 /dev/dm-0
[    7.744057] usb 7-2: new low-speed USB device number 3 using uhci_hcd
[    7.884282] PM: Starting manual resume from disk
[    7.884286] PM: Hibernation image partition 254:1 present
[    7.884287] PM: Looking for hibernation image.
[    7.884573] PM: Image not found (code -22)
[    7.884574] PM: Hibernation image not present or could not be loaded.
[    7.944071] usb 7-2: New USB device found, idVendor=046d, idProduct=c03d
[    7.944074] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.944076] usb 7-2: Product: USB-PS/2 Optical Mouse
[    7.944077] usb 7-2: Manufacturer: Logitech
[    7.960602] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/0003:046D:C03D.0003/input/input13
[    7.960724] hid-generic 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0
[    8.135816] BTRFS info (device dm-0): disk space caching is enabled
[    8.135819] BTRFS info (device dm-0): has skinny extents
[    9.116886] systemd-journald[141]: Received SIGTERM from PID 1 (systemd).
[    9.328370] systemd: 16 output lines suppressed due to ratelimiting
[   11.034561] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[   14.241731] BTRFS info (device dm-0): disk space caching is enabled
[   16.368496] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x0000000000001042 (\_SB.C003.C004.C0D2) (20170303/utaddress-213)
[   16.368504] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.368507] ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB.C003.C004.C0E4) (20170303/utaddress-213)
[   16.368511] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.368513] ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB.C003.C004.C0E4) (20170303/utaddress-213)
[   16.368517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.368517] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.370292] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14
[   16.370445] ACPI: Sleep Button [C2BF]
[   16.370591] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input15
[   16.370950] ACPI: Lid Switch [C153]
[   16.371007] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input16
[   16.371162] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   16.371165] ACPI: Battery Slot [C23B] (battery absent)
[   16.371277] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   16.371282] ACPI: Battery Slot [C23A] (battery absent)
[   16.372049] ACPI: Power Button [PWRF]
[   16.389030] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   16.389077] ACPI: AC Adapter [C239] (on-line)
[   16.452093] wmi_bus wmi_bus-PNP0C14:00: WQBG data block query control method not found
[   16.490490] pps_core: LinuxPPS API ver. 1 registered
[   16.490492] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[   16.509200] PTP clock support registered
[   16.659282] hp_accel: hardware type NC6710x found
[   16.660040] lis3lv02d: 12 bits sensor found
[   16.697879] tg3.c:v3.137 (May 11, 2014)
[   16.804118] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
[   16.840445] tg3 0000:18:00.0: VPD access failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[   16.841623] tg3 0000:18:00.0 eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:73:ab:33
[   16.841626] tg3 0000:18:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   16.841628] tg3 0000:18:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   16.841630] tg3 0000:18:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   16.938767] thermal LNXTHERM:00: registered as thermal_zone0
[   16.938770] ACPI: Thermal Zone [TZ3] (46 C)
[   16.954336] thermal LNXTHERM:01: registered as thermal_zone1
[   16.954340] ACPI: Thermal Zone [TZ4] (25 C)
[   16.960093] thermal LNXTHERM:02: registered as thermal_zone2
[   16.960095] ACPI: Thermal Zone [TZ5] (20 C)
[   16.964748] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   16.964756]  excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[   16.964809] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   16.964819]  excluding 0xa0000000-0xa0ffffff
[   16.964865] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   16.964875]  excluding 0x60000000-0x60ffffff
[   16.986107] thermal LNXTHERM:03: registered as thermal_zone3
[   16.986112] ACPI: Thermal Zone [TZ0] (67 C)
[   16.991055] thermal LNXTHERM:04: registered as thermal_zone4
[   16.991058] ACPI: Thermal Zone [TZ1] (66 C)
[   17.126596] parport_pc 00:01: reported by Plug and Play ACPI
[   17.126678] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   17.130209] input: PC Speaker as /devices/platform/pcspkr/input/input18
[   17.230524] iTCO_vendor_support: vendor-support=0
[   17.231358] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   17.231419] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   17.231538] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   17.417500] wl: loading out-of-tree module taints kernel.
[   17.417506] wl: module license 'MIXED/Proprietary' taints kernel.
[   17.417507] Disabling lock debugging due to kernel taint
[   17.456087] ppdev: user-space parallel port driver
[   17.463972] malloc in abgphy done
[   17.464317] malloc in abgphy done
[   17.466580] wlan0: Broadcom BCM4312 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)

[   17.773510] input: HP WMI hotkeys as /devices/virtual/input/input19
[   18.520050] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[   18.716097] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
[   18.716100] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   18.716102] usb 3-1: Product: HP Integrated Module
[   18.716104] usb 3-1: Manufacturer: Broadcom Corp
[   18.810962] intel_powerclamp: No package C-state available
[   18.848640] intel_powerclamp: No package C-state available
[   19.429001] Adding 2097148k swap on /dev/mapper/system-swap.  Priority:-1 extents:1 across:2097148k FS
[   19.497522] usb 3-1: USB disconnect, device number 2
[   19.543219] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
[   19.543222] snd_hda_codec_analog hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.543224] snd_hda_codec_analog hdaudioC0D0:    hp_outs=1 (0x6/0x0/0x0/0x0/0x0)
[   19.543225] snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0
[   19.543227] snd_hda_codec_analog hdaudioC0D0:    inputs:
[   19.543229] snd_hda_codec_analog hdaudioC0D0:      Mic=0x8
[   19.543231] snd_hda_codec_analog hdaudioC0D0:      Internal Mic=0x18
[   19.543233] snd_hda_codec_analog hdaudioC0D0:      Line=0x9
[   19.773576] systemd-journald[537]: Received request to flush runtime journal from PID 1
[   19.791617] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   19.791703] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[   19.793301] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[   19.793382] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[   20.416898] Bluetooth: Core ver 2.22
[   20.416935] NET: Registered protocol family 31
[   20.416937] Bluetooth: HCI device and connection manager initialized
[   20.416943] Bluetooth: HCI socket layer initialized
[   20.416947] Bluetooth: L2CAP socket layer initialized
[   20.416956] Bluetooth: SCO socket layer initialized
[   21.067713] usbcore: registered new interface driver btusb
[   29.209198] ip_tables: (C) 2000-2006 Netfilter Core Team
[   29.356249] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   29.597566] Ebtables v2.0 registered
[   29.766681] Loading iSCSI transport class v2.0-870.
[   30.445829] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   30.700711] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.739956] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.748062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   31.132147] NET: Registered protocol family 17
[   31.180385] ERROR @wl_cfg80211_scan : 
[   31.180389] WLC_SCAN error (-22)
[   31.825533] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   31.827483] Bridge firewalling registered
[   32.002451] Netfilter messages via NETLINK v0.30.
[   32.063677] ip_set: protocol 6
[   32.320287] tg3 0000:18:00.0 eth0: Link is up at 100 Mbps, full duplex
[   32.320290] tg3 0000:18:00.0 eth0: Flow control is on for TX and on for RX
[   32.321083] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   34.003307] ERROR @wl_cfg80211_scan : 
[   34.003310] WLC_SCAN error (-22)
[   57.000777] ERROR @wl_cfg80211_scan : 
[   57.000781] WLC_SCAN error (-22)
[   64.441960] fuse init (API version 7.26)
[   64.461071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   64.461073] Bluetooth: BNEP filters: protocol multicast
[   64.461079] Bluetooth: BNEP socket layer initialized
[   90.004779] ERROR @wl_cfg80211_scan : 
[   90.004783] WLC_SCAN error (-22)
[  133.039626] ERROR @wl_cfg80211_scan : 
[  133.039631] WLC_SCAN error (-22)
[  186.005887] ERROR @wl_cfg80211_scan : 
[  186.005894] WLC_SCAN error (-22)
[  249.065335] ERROR @wl_cfg80211_scan : 
[  249.065345] WLC_SCAN error (-22)
[  312.005575] ERROR @wl_cfg80211_scan : 
[  312.005581] WLC_SCAN error (-22)
[  375.089017] ERROR @wl_cfg80211_scan : 
[  375.089023] WLC_SCAN error (-22)
[  375.095669] ERROR @wl_cfg80211_scan : 
[  375.095671] WLC_SCAN error (-22)
[  438.061284] ERROR @wl_cfg80211_scan : 
[  438.061292] WLC_SCAN error (-22)
[  501.007018] ERROR @wl_cfg80211_scan : 
[  501.007024] WLC_SCAN error (-22)
[  564.061570] ERROR @wl_cfg80211_scan : 
[  564.061577] WLC_SCAN error (-22)
[  627.006447] ERROR @wl_cfg80211_scan : 
[  627.006454] WLC_SCAN error (-22)
[  690.063150] ERROR @wl_cfg80211_scan : 
[  690.063153] WLC_SCAN error (-22)
[  703.437898] BTRFS info (device dm-0): qgroup scan completed (inconsistency flag cleared)
[  753.061642] ERROR @wl_cfg80211_scan : 
[  753.061649] WLC_SCAN error (-22)
[  816.014017] ERROR @wl_cfg80211_scan : 
[  816.014024] WLC_SCAN error (-22)
[  879.056409] ERROR @wl_cfg80211_scan : 
[  879.056416] WLC_SCAN error (-22)
[  912.149542] ERROR @wl_cfg80211_scan : 
[  912.149547] WLC_SCAN error (-22)
[  930.012080] ERROR @wl_cfg80211_scan : 
[  930.012083] WLC_SCAN error (-22)
[  945.012320] ERROR @wl_cfg80211_scan : 
[  945.012324] WLC_SCAN error (-22)
[ 1008.096966] ERROR @wl_cfg80211_scan : 
[ 1008.096974] WLC_SCAN error (-22)
[ 1008.103786] ERROR @wl_cfg80211_scan : 
[ 1008.103788] WLC_SCAN error (-22)
[ 1071.019567] ERROR @wl_cfg80211_scan : 
[ 1071.019574] WLC_SCAN error (-22)
[ 1134.061221] ERROR @wl_cfg80211_scan : 
[ 1134.061224] WLC_SCAN error (-22)
[ 1197.064687] ERROR @wl_cfg80211_scan : 
[ 1197.064694] WLC_SCAN error (-22)
[ 1260.004373] ERROR @wl_cfg80211_scan : 
[ 1260.004380] WLC_SCAN error (-22)
[ 1323.064391] ERROR @wl_cfg80211_scan : 
[ 1323.064395] WLC_SCAN error (-22)
[ 1386.006161] ERROR @wl_cfg80211_scan : 
[ 1386.006169] WLC_SCAN error (-22)
[ 1449.060764] ERROR @wl_cfg80211_scan : 
[ 1449.060768] WLC_SCAN error (-22)
[ 1512.028379] ERROR @wl_cfg80211_scan : 
[ 1512.028386] WLC_SCAN error (-22)
[ 1575.020271] ERROR @wl_cfg80211_scan : 
[ 1575.020277] WLC_SCAN error (-22)
[ 1638.014579] ERROR @wl_cfg80211_scan : 
[ 1638.014585] WLC_SCAN error (-22)
[ 1701.061586] ERROR @wl_cfg80211_scan : 
[ 1701.061593] WLC_SCAN error (-22)
[ 1764.012455] ERROR @wl_cfg80211_scan : 
[ 1764.012461] WLC_SCAN error (-22)
[ 1827.025537] ERROR @wl_cfg80211_scan : 
[ 1827.025544] WLC_SCAN error (-22)
[ 1890.011599] ERROR @wl_cfg80211_scan : 
[ 1890.011603] WLC_SCAN error (-22)
[ 1953.084508] ERROR @wl_cfg80211_scan : 
[ 1953.084511] WLC_SCAN error (-22)
[ 1953.091061] ERROR @wl_cfg80211_scan : 
[ 1953.091064] WLC_SCAN error (-22)
[ 2016.063952] ERROR @wl_cfg80211_scan : 
[ 2016.063958] WLC_SCAN error (-22)
[ 2079.055251] ERROR @wl_cfg80211_scan : 
[ 2079.055259] WLC_SCAN error (-22)
[ 2142.003167] ERROR @wl_cfg80211_scan : 
[ 2142.003171] WLC_SCAN error (-22)
[ 2205.063537] ERROR @wl_cfg80211_scan : 
[ 2205.063544] WLC_SCAN error (-22)
[ 2268.066558] ERROR @wl_cfg80211_scan : 
[ 2268.066561] WLC_SCAN error (-22)
[ 2331.015375] ERROR @wl_cfg80211_scan : 
[ 2331.015382] WLC_SCAN error (-22)
[ 2394.060865] ERROR @wl_cfg80211_scan : 
[ 2394.060869] WLC_SCAN error (-22)
[ 2457.019268] ERROR @wl_cfg80211_scan : 
[ 2457.019275] WLC_SCAN error (-22)
[ 2520.061687] ERROR @wl_cfg80211_scan : 
[ 2520.061694] WLC_SCAN error (-22)
[ 2583.068740] ERROR @wl_cfg80211_scan : 
[ 2583.068744] WLC_SCAN error (-22)
linux-6g8o:/home/jan #